Hubbell

RS Pro

SCHNEIDER ELECTRIC

Electricals

electricals

Busbar 

busbar

Circuit Breaker

circuit-breaker

Contact Block

contact-block

Electrical Cover

electrical-cover

Mechanical Parts

mechanical-parts

O Ring

o-ring

Circuit Breakers

circuit-breakers

Residual current devices - RCDs

residual-current-devices-rcds

Rubber Seals

rubber-seals

Harvey Hubbell NP8 Plate Duplex 1G Brn Smooth

Wall Plate, Duplex, Number of Gangs 1, Color Brown, Finish Smooth, Material of Construction Nylon, Size Standard

Overall Dimension 2.88 Inch W x 4.63 Inch H x 0.25 Inch 

<h3 class="md-block-header-three">Harvey Hubbell NP8 Plate Duplex 1G Brn Smooth</h3>Wall Plate, Duplex, Number of Gangs 1, Color Brown, Finish Smooth, Material of Construction Nylon, Size Standard<ul class="md-block-unordered-list-item"><li>Overall Dimension 2.88 Inch W x 4.63 Inch H x 0.25 Inch </li></ul>

<h3>Harvey Hubbell NP8 Plate Duplex 1G Brn Smooth</h3>
Wall Plate, Duplex, Number of Gangs 1, Color Brown, Finish Smooth, Material of Construction Nylon, Size Standard
<ul>
<li>Overall Dimension 2.88 Inch W x 4.63 Inch H x 0.25 Inch&nbsp;</li>
</ul>

Jimmy Foo

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Fuses & Fusegear

Plugs & Connector 

Light Bulbs

Led Lights

Contactors

Junction & Enclosure Box

Other Electrical Accessories

Light Tubes

Doreen Tan

buyerIntroduction

harvey hubbell np8 plate duplex 1g brn smooth halus electrical cover penutup listrik elektrik hubbell/哈贝尔 板双面 棕色光滑 哈贝尔

harvey-hubbell-np8-plate-duplex-1g-brn-smooth

Datasheet

STANLEY

ECLIPSE TOOLS

Contitech

Facom

PEGLER YORKSHIRE

Omron

CEJN

Vent-Axia

Screw

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Aluminium Capacitors

Air Filters

RS Components ETH SG

Rs Pro 2119033 Nitrile Rubber Seal, 28mm Id, 40mm Od, 7mm

rs pro 2119033 nitrile rubber seal, 28mm id, 40mm od, 7mm segel karet nitril, id 28mm, od 40mm, seals pengedap getah 丁腈橡胶密封件，内径 28 毫米，外径 40 毫米，7 毫米 rs专业版

rs-pro-2119033-nitrile-rubber-seal-28mm-id-40mm-od-7mm

Rs Pro 2119106 Nitrile Rubber Seal, 32mm Id, 45mm Od, 7mm

rs pro 2119106 nitrile rubber seal, 32mm id, 45mm od, 7mm segel karet nitril, id 32mm, od 45mm, seals pengedap getah 丁腈橡胶密封件，内径 32 毫米，外径 45 毫米，7 毫米 rs专业版

rs-pro-2119106-nitrile-rubber-seal-32mm-id-45mm-od-7mm

Long Description:The MCB-10 Contact Block is: Without holder - Non-illuminated - Single contact block - Front mounting - silver (Ag) - 1 NO - 0NC - 690 V

This Contact Block is part of ABB's modular plastic range, the most versatile range with a high level of flexibility and market-leading electrical ratings. Engineered for total reliability, longer lifetime, and highest mechanical durability. Self-cleaning contacts ensure reliable operation without the need for maintenance, increasing uptime. A high degree of protection guarantees reliability in extreme environments. The innovative design simplifies the entire process, from selection to easy and quick, tool-free installation. The perfect solution for every application.

Ambient Air Temperature:Operation -25 ... +70 °C

Rated Impulse Withstand Voltage (Uimp):6 kV

Rated Operational Current DC-13 (Ie):(24 V) 5 A

Rated Operational Current AC-15 (Ie):(230 V AC) 6 A

Connecting Capacity:Flexible with Ferrule 1 x 0.75...2.5 mm²

Flexible with Ferrule 2 x 0.75...2.5 mm²

Flexible with Insulated Ferrule 1 x 0.75...2.5 mm²

Flexible with Insulated Ferrule 2 x 0.75...2.5 mm²

<h3 class="md-block-header-three">Abb MCB-10 Contact Block No MCB-10</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:MCB-10</li><li>Product ID:1SFA611610R1001</li><li>EAN:7320500544327</li><li>Catalog Description:MCB-10 Contact Block</li><li>Long Description:The MCB-10 Contact Block is: Without holder - Non-illuminated - Single contact block - Front mounting - silver (Ag) - 1 NO - 0NC - 690 V</li><li>This Contact Block is part of ABB&#x27;s modular plastic range, the most versatile range with a high level of flexibility and market-leading electrical ratings. Engineered for total reliability, longer lifetime, and highest mechanical durability. Self-cleaning contacts ensure reliable operation without the need for maintenance, increasing uptime. A high degree of protection guarantees reliability in extreme environments. The innovative design simplifies the entire process, from selection to easy and quick, tool-free installation. The perfect solution for every application.</li><li>Unit of Measurement : PCS</li></ul>Technical<ul class="md-block-unordered-list-item"><li>Ambient Air Temperature:Operation -25 ... +70 °C</li><li>Storage -40 ... +85 °C</li><li>Illumination:Non-illuminated</li><li>Function:Without holder</li><li>Mounting Type:Front mounting</li><li>Number of Auxiliary Contacts NC:0</li><li>Number of Auxiliary Contacts NO:1</li><li>Degree of Protection:Terminals IP20</li><li>Pollution Degree:3</li><li>Rated Insulation Voltage (Ui):690 V</li><li>Rated Impulse Withstand Voltage (Uimp):6 kV</li><li>Rated Frequency (f):50 / 60 Hz</li><li>Rated Operational Voltage:Maximum 690 V</li><li>Rated Operational Current DC-13 (Ie):(24 V) 5 A</li><li>(125 V) 0.55 A</li><li>Rated Operational Current AC-15 (Ie):(230 V AC) 6 A</li><li>Power Loss:Maximum 2.5 W</li><li>Mechanical Durability:10 million</li><li>Connecting Capacity:Flexible with Ferrule 1 x 0.75...2.5 mm²</li><li>Flexible with Ferrule 2 x 0.75...2.5 mm²</li><li>Flexible with Insulated Ferrule 1 x 0.75...2.5 mm²</li><li>Flexible with Insulated Ferrule 2 x 0.75...2.5 mm²</li><li>Flexible 1 x 0.75 ... 2.5 mm²</li><li>Flexible 2 x 0.75 ... 2.5 mm²</li><li>Solid 1 x 0.75...2.5 mm²</li><li>Solid 2 x 0.75...2.5 mm²</li><li>Connection Type:Screw Clamp</li><li>Terminal Type:Screw Terminals</li><li>Tightening Torque:0.9 N·m</li><li>Wire Stripping Length:8 mm</li><li>Suitable For:MP1</li><li>MP2</li><li>MP3</li><li>MP4</li><li>MPD1</li><li>MPD2</li><li>MPD3</li><li>MPD4</li><li>MPD5</li><li>MPD11</li><li>MPD12</li><li>MPD13</li><li>MPD14</li><li>MPD15</li><li>MPD16</li><li>MPM1</li><li>MPM2</li><li>KP6</li><li>MPET3</li><li>MPEP3</li><li>MPEK3</li><li>MPET4</li><li>MPEP4</li><li>MPEK4</li><li>MPMT3</li><li>MPMT4</li><li>MPMP3</li><li>MPMP4</li><li>M2SS1</li><li>M2SS2</li><li>M2SS3</li><li>M2SS4</li><li>M2SS5</li><li>M2SS6</li><li>M3SS1</li><li>M3SS2</li><li>M3SS3</li><li>M3SS4</li><li>M3SS5</li><li>M3SS6</li><li>M3SS7</li><li>M3SS8</li><li>M3SSC1</li><li>M3SSC2</li><li>M3SSC3</li><li>M3SSC4</li><li>M3SSC5</li><li>M3SSC6</li><li>M3SSC7</li><li>M3SSC8</li><li>M2SSK1</li><li>M2SSK2</li><li>M2SSK3</li><li>M3SSK1</li><li>M3SSK2</li><li>M3SSK3</li><li>MTS1</li><li>MTS2</li><li>MTS3</li><li>MJS1</li><li>MJS2</li><li>MJS5</li><li>MJS6</li><li>MJS7</li><li>MJS8</li><li>MJS11</li><li>MJS12</li><li>Suitable for Product Class:Pilot Devices</li></ul>

<h3>Abb MCB-10 Contact Block No MCB-10</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:MCB-10</li>
<li>Product ID:1SFA611610R1001</li>
<li>EAN:7320500544327</li>
<li>Catalog Description:MCB-10 Contact Block</li>
<li>Long Description:The MCB-10 Contact Block is: Without holder - Non-illuminated - Single contact block - Front mounting - silver (Ag) - 1 NO - 0NC - 690 V</li>
<li>This Contact Block is part of ABB's modular plastic range, the most versatile range with a high level of flexibility and market-leading electrical ratings. Engineered for total reliability, longer lifetime, and highest mechanical durability. Self-cleaning contacts ensure reliable operation without the need for maintenance, increasing uptime. A high degree of protection guarantees reliability in extreme environments. The innovative design simplifies the entire process, from selection to easy and quick, tool-free installation. The perfect solution for every application.</li>
<li>Unit of Measurement : PCS</li>
</ul>
Technical
<ul>
<li>Ambient Air Temperature:Operation -25 ... +70 °C</li>
<li>Storage -40 ... +85 °C</li>
<li>Illumination:Non-illuminated</li>
<li>Function:Without holder</li>
<li>Mounting Type:Front mounting</li>
<li>Number of Auxiliary Contacts NC:0</li>
<li>Number of Auxiliary Contacts NO:1</li>
<li>Degree of Protection:Terminals IP20</li>
<li>Pollution Degree:3</li>
<li>Rated Insulation Voltage (Ui):690 V</li>
<li>Rated Impulse Withstand Voltage (Uimp):6 kV</li>
<li>Rated Frequency (f):50 / 60 Hz</li>
<li>Rated Operational Voltage:Maximum 690 V</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 5 A</li>
<li>(125 V) 0.55 A</li>
<li>Rated Operational Current AC-15 (Ie):(230 V AC) 6 A</li>
<li>Power Loss:Maximum 2.5 W</li>
<li>Mechanical Durability:10 million</li>
<li>Connecting Capacity:Flexible with Ferrule 1 x 0.75...2.5 mm²</li>
<li>Flexible with Ferrule 2 x 0.75...2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1 x 0.75...2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2 x 0.75...2.5 mm²</li>
<li>Flexible 1 x 0.75 ... 2.5 mm²</li>
<li>Flexible 2 x 0.75 ... 2.5 mm²</li>
<li>Solid 1 x 0.75...2.5 mm²</li>
<li>Solid 2 x 0.75...2.5 mm²</li>
<li>Connection Type:Screw Clamp</li>
<li>Terminal Type:Screw Terminals</li>
<li>Tightening Torque:0.9 N·m</li>
<li>Wire Stripping Length:8 mm</li>
<li>Suitable For:MP1</li>
<li>MP2</li>
<li>MP3</li>
<li>MP4</li>
<li>MPD1</li>
<li>MPD2</li>
<li>MPD3</li>
<li>MPD4</li>
<li>MPD5</li>
<li>MPD11</li>
<li>MPD12</li>
<li>MPD13</li>
<li>MPD14</li>
<li>MPD15</li>
<li>MPD16</li>
<li>MPM1</li>
<li>MPM2</li>
<li>KP6</li>
<li>MPET3</li>
<li>MPEP3</li>
<li>MPEK3</li>
<li>MPET4</li>
<li>MPEP4</li>
<li>MPEK4</li>
<li>MPMT3</li>
<li>MPMT4</li>
<li>MPMP3</li>
<li>MPMP4</li>
<li>M2SS1</li>
<li>M2SS2</li>
<li>M2SS3</li>
<li>M2SS4</li>
<li>M2SS5</li>
<li>M2SS6</li>
<li>M3SS1</li>
<li>M3SS2</li>
<li>M3SS3</li>
<li>M3SS4</li>
<li>M3SS5</li>
<li>M3SS6</li>
<li>M3SS7</li>
<li>M3SS8</li>
<li>M3SSC1</li>
<li>M3SSC2</li>
<li>M3SSC3</li>
<li>M3SSC4</li>
<li>M3SSC5</li>
<li>M3SSC6</li>
<li>M3SSC7</li>
<li>M3SSC8</li>
<li>M2SSK1</li>
<li>M2SSK2</li>
<li>M2SSK3</li>
<li>M3SSK1</li>
<li>M3SSK2</li>
<li>M3SSK3</li>
<li>MTS1</li>
<li>MTS2</li>
<li>MTS3</li>
<li>MJS1</li>
<li>MJS2</li>
<li>MJS5</li>
<li>MJS6</li>
<li>MJS7</li>
<li>MJS8</li>
<li>MJS11</li>
<li>MJS12</li>
<li>Suitable for Product Class:Pilot Devices</li>
</ul>

Abb MCB-10 Contact Block No MCB-10

abb mcb-10 contact block blok kontak kenalan 接触块

abb-mcb-10-contact-block-no-mcb-10

RS PRO Datasheet

Rs Pro 2270820 Nitrile Rubber Seal, 44.45mm Id, 57.15mm Od, 0.375in (1 Bag of 5)

rs pro 2270820 nitrile rubber seal, 44.45mm id, 57.15mm od, 0.375in (1 bag 5) segel karet nitril, id 44,45mm, od 57,15mm, 0,375in kantong berisi seals pengedap getah 44.45mm, 57.15mm, beg 丁腈橡胶密封件，内径 44.45 毫米，外径 57.15 毫米，0.375 英寸（1 个） rs专业版

rs-pro-2270820-nitrile-rubber-seal-44-45mm-id-57-15mm-od-0-375in-1-bag-of-5

Catalog Description:MCBH-11 Contact Block

Long Description:The MCBH-11 Contact Block is: Maintained - Non-illuminated - Single contact block - Front mounting - silver (Ag) - 1 NO - 1NC - 690 V

<h3 class="md-block-header-three">Abb MCBH-11 Contact Block 1NO 1NC</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:MCBH-11</li><li>Product ID:1SFA611605R1111</li><li>EAN:7320500307519</li><li>Catalog Description:MCBH-11 Contact Block</li><li>Long Description:The MCBH-11 Contact Block is: Maintained - Non-illuminated - Single contact block - Front mounting - silver (Ag) - 1 NO - 1NC - 690 V</li><li>This Contact Block is part of ABB&#x27;s modular plastic range, the most versatile range with a high level of flexibility and market-leading electrical ratings. Engineered for total reliability, longer lifetime, and highest mechanical durability. Self-cleaning contacts ensure reliable operation without the need for maintenance, increasing uptime. A high degree of protection guarantees reliability in extreme environments. The innovative design simplifies the entire process, from selection to easy and quick, tool-free installation. The perfect solution for every application.</li><li>Unit of Measurement : Each</li></ul>Technical<ul class="md-block-unordered-list-item"><li>Ambient Air Temperature:Operation -25 ... +70 °C</li><li>Storage -40 ... +85 °C</li><li>Illumination:Non-illuminated</li><li>Function:With 3-position holder</li><li>Mounting Type:Front mounting</li><li>Number of Auxiliary Contacts NC:1</li><li>Number of Auxiliary Contacts NO:1</li><li>Degree of Protection:Terminals IP20</li><li>Pollution Degree:3</li><li>Rated Insulation Voltage (Ui):690 V</li><li>Rated Impulse Withstand Voltage (Uimp):6 kV</li><li>Rated Frequency (f):50 / 60 Hz</li><li>Rated Operational Voltage:Maximum 690 V</li><li>Rated Operational Current DC-13 (Ie):(24 V) 5 A</li><li>(125 V) 0.55 A</li><li>Rated Operational Current AC-15 (Ie):(230 V AC) 6 A</li><li>Power Loss:Maximum 5 W</li><li>Mechanical Durability:10 million</li><li>Connecting Capacity:Flexible with Ferrule 1 x 0.75...2.5 mm²</li><li>Flexible with Ferrule 2 x 0.75...2.5 mm²</li><li>Flexible with Insulated Ferrule 1 x 0.75...2.5 mm²</li><li>Flexible with Insulated Ferrule 2 x 0.75...2.5 mm²</li><li>Flexible 1 x 0.75 ... 2.5 mm²</li><li>Flexible 2 x 0.75 ... 2.5 mm²</li><li>Solid 1 x 0.75...2.5 mm²</li><li>Solid 2 x 0.75...2.5 mm²</li><li>Connection Type:Screw Clamp</li><li>Terminal Type:Screw Terminals</li><li>Tightening Torque:0.9 N·m</li><li>Wire Stripping Length:8 mm</li><li>Suitable For:MP1</li><li>MP2</li><li>MP3</li><li>MP4</li><li>MPD1</li><li>MPD2</li><li>MPD3</li><li>MPD4</li><li>MPD5</li><li>MPD11</li><li>MPD12</li><li>MPD13</li><li>MPD14</li><li>MPD15</li><li>MPD16</li><li>MPM1</li><li>MPM2</li><li>KP6</li><li>MPET3</li><li>MPEP3</li><li>MPEK3</li><li>MPET4</li><li>MPEP4</li><li>MPEK4</li><li>MPMT3</li><li>MPMT4</li><li>MPMP3</li><li>MPMP4</li><li>M2SS1</li><li>M2SS2</li><li>M2SS3</li><li>M2SS4</li><li>M2SS5</li><li>M2SS6</li><li>M3SS1</li><li>M3SS2</li><li>M3SS3</li><li>M3SS4</li><li>M3SS5</li><li>M3SS6</li><li>M3SS7</li><li>M3SS8</li><li>M3SSC1</li><li>M3SSC2</li><li>M3SSC3</li><li>M3SSC4</li><li>M3SSC5</li><li>M3SSC6</li><li>M3SSC7</li><li>M3SSC8</li><li>M2SSK1</li><li>M2SSK2</li><li>M2SSK3</li><li>M3SSK1</li><li>M3SSK2</li><li>M3SSK3</li><li>MTS1</li><li>MTS2</li><li>MTS3</li><li>MJS1</li><li>MJS2</li><li>MJS5</li><li>MJS6</li><li>MJS7</li><li>MJS8</li><li>MJS11</li><li>MJS12</li><li>Suitable for Product Class:Pilot Devices</li></ul>

<h3>Abb MCBH-11 Contact Block 1NO 1NC</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:MCBH-11</li>
<li>Product ID:1SFA611605R1111</li>
<li>EAN:7320500307519</li>
<li>Catalog Description:MCBH-11 Contact Block</li>
<li>Long Description:The MCBH-11 Contact Block is: Maintained - Non-illuminated - Single contact block - Front mounting - silver (Ag) - 1 NO - 1NC - 690 V</li>
<li>This Contact Block is part of ABB's modular plastic range, the most versatile range with a high level of flexibility and market-leading electrical ratings. Engineered for total reliability, longer lifetime, and highest mechanical durability. Self-cleaning contacts ensure reliable operation without the need for maintenance, increasing uptime. A high degree of protection guarantees reliability in extreme environments. The innovative design simplifies the entire process, from selection to easy and quick, tool-free installation. The perfect solution for every application.</li>
<li>Unit of Measurement : Each</li>
</ul>
Technical
<ul>
<li>Ambient Air Temperature:Operation -25 ... +70 °C</li>
<li>Storage -40 ... +85 °C</li>
<li>Illumination:Non-illuminated</li>
<li>Function:With 3-position holder</li>
<li>Mounting Type:Front mounting</li>
<li>Number of Auxiliary Contacts NC:1</li>
<li>Number of Auxiliary Contacts NO:1</li>
<li>Degree of Protection:Terminals IP20</li>
<li>Pollution Degree:3</li>
<li>Rated Insulation Voltage (Ui):690 V</li>
<li>Rated Impulse Withstand Voltage (Uimp):6 kV</li>
<li>Rated Frequency (f):50 / 60 Hz</li>
<li>Rated Operational Voltage:Maximum 690 V</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 5 A</li>
<li>(125 V) 0.55 A</li>
<li>Rated Operational Current AC-15 (Ie):(230 V AC) 6 A</li>
<li>Power Loss:Maximum 5 W</li>
<li>Mechanical Durability:10 million</li>
<li>Connecting Capacity:Flexible with Ferrule 1 x 0.75...2.5 mm²</li>
<li>Flexible with Ferrule 2 x 0.75...2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1 x 0.75...2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2 x 0.75...2.5 mm²</li>
<li>Flexible 1 x 0.75 ... 2.5 mm²</li>
<li>Flexible 2 x 0.75 ... 2.5 mm²</li>
<li>Solid 1 x 0.75...2.5 mm²</li>
<li>Solid 2 x 0.75...2.5 mm²</li>
<li>Connection Type:Screw Clamp</li>
<li>Terminal Type:Screw Terminals</li>
<li>Tightening Torque:0.9 N·m</li>
<li>Wire Stripping Length:8 mm</li>
<li>Suitable For:MP1</li>
<li>MP2</li>
<li>MP3</li>
<li>MP4</li>
<li>MPD1</li>
<li>MPD2</li>
<li>MPD3</li>
<li>MPD4</li>
<li>MPD5</li>
<li>MPD11</li>
<li>MPD12</li>
<li>MPD13</li>
<li>MPD14</li>
<li>MPD15</li>
<li>MPD16</li>
<li>MPM1</li>
<li>MPM2</li>
<li>KP6</li>
<li>MPET3</li>
<li>MPEP3</li>
<li>MPEK3</li>
<li>MPET4</li>
<li>MPEP4</li>
<li>MPEK4</li>
<li>MPMT3</li>
<li>MPMT4</li>
<li>MPMP3</li>
<li>MPMP4</li>
<li>M2SS1</li>
<li>M2SS2</li>
<li>M2SS3</li>
<li>M2SS4</li>
<li>M2SS5</li>
<li>M2SS6</li>
<li>M3SS1</li>
<li>M3SS2</li>
<li>M3SS3</li>
<li>M3SS4</li>
<li>M3SS5</li>
<li>M3SS6</li>
<li>M3SS7</li>
<li>M3SS8</li>
<li>M3SSC1</li>
<li>M3SSC2</li>
<li>M3SSC3</li>
<li>M3SSC4</li>
<li>M3SSC5</li>
<li>M3SSC6</li>
<li>M3SSC7</li>
<li>M3SSC8</li>
<li>M2SSK1</li>
<li>M2SSK2</li>
<li>M2SSK3</li>
<li>M3SSK1</li>
<li>M3SSK2</li>
<li>M3SSK3</li>
<li>MTS1</li>
<li>MTS2</li>
<li>MTS3</li>
<li>MJS1</li>
<li>MJS2</li>
<li>MJS5</li>
<li>MJS6</li>
<li>MJS7</li>
<li>MJS8</li>
<li>MJS11</li>
<li>MJS12</li>
<li>Suitable for Product Class:Pilot Devices</li>
</ul>

Abb MCBH-11 Contact Block 1NO 1NC

abb mcbh-11 contact block 1no 1nc blok kontak kenalan 触点块 接触块

abb-mcbh-11-contact-block-1no-1nc

RS PRO O-Rings Overview

PHOENIX CONTACT

Mag-Lite

Wago

Kimberly Clark

HEICO

Clamps

Indicator Lights

Ethernet Cable

Drill Bits & Drill Bit Sets

Rs Pro 1964813 Nitrile Rubber O-Ring, 88.49mm Bore, 95.55mm Outer Diameter (1 Bag of 25)

rs pro 1964813 nitrile rubber o-ring, 88.49mm bore, 95.55mm outer diameter (1 bag 25) o-ring karet nitril, lubang 88,49mm, luar 95,55mm kantong isi ring cincin getah bor 88.49mm, beg gelang 丁腈橡胶 形圈，内径 88.49 毫米，外径 95.55 毫米（1 25 个） o型圈 rs专业版

rs-pro-1964813-nitrile-rubber-o-ring-88-49mm-bore-95-55mm-outer-diameter-1-bag-of-25

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING JIS B2401 G320 ID 329.30 x CS 5.70Material : Nitrile (NBR) 70 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/o8_au_J5q7S~_Tabxp7mnb.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 G320&nbsp;
ID 329.30 x CS 5.70
Material : Nitrile (NBR) 70 Shore
&nbsp;&nbsp;&nbsp;&nbsp;
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:6nacv"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/o8_au_J5q7S~_Tabxp7mnb.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="6nacv" 
 layout="nodisplay"></amp-image-lightbox>

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

ORING JIS B2401 G320 ID 319.30 x CS 5.70 Nitrile (NBR) 70 Shore

oring jis b2401 g320 id 319.30 cs 5.70 nitrile (nbr) 70 shore ring o-ring oem gelang oem/oem代工 5.70腈（nbr）70肖氏 o型圈 oem代工

oring-jis-b2401-g320-id-319-30-x-cs-5-70-nitrile-nbr-70-shore

ORING JIS B2401 G320 ID 329.30 x CS 5.70Material : Nitrile (NBR) 90 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/Kp~v_xtFiHtc5AnY9i5gSH.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 G320
&nbsp;ID 329.30 x CS 5.70
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;&nbsp;&nbsp;
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:80nj9"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Kp~v_xtFiHtc5AnY9i5gSH.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="80nj9" 
 layout="nodisplay"></amp-image-lightbox>

ORING JIS B2401 G320 ID 319.30 x CS 5.70 Nitrile (NBR) 90 Shore

oring jis b2401 g320 id 319.30 cs 5.70 nitrile (nbr) 90 shore ring o-ring oem pantai gelang oem/oem代工 5.70腈（nbr）90肖氏 o型圈 oem代工

oring-jis-b2401-g320-id-319-30-x-cs-5-70-nitrile-nbr-90-shore

SCHNEIDER ELECTRIC Acti 9 - Comb Busbar - 1L+N - 18 Mm Pitch - 24 Modules - 100 A A9XPH224

 This Acti9 product is a cuttable horizontal comb busbar 24 modules for Acti9 iC60 or Acti9 iK60. It is dedicated to N+1L installations. The type is NL (Neutral, Line). It is a set of 1 device. It is suitable for 12 devices (1P+N). The length is 430mm. The total number of modules of 18mm is 24. The pin cross section is 16mm2. The type of electric connection is PIN. The number of phase is 1. The number of poles is 2. The Ie rated operational current at 40°C is 100A The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 500VAC. The Ue rated operational voltage is 415VAC. The color of the device is white RAL9003. The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s. It complies with IEC 60947-7-1 and IEC 61439-2 standards. 

<h3 class="md-block-header-three">SCHNEIDER ELECTRIC Acti 9 - Comb Busbar - 1L+N - 18 Mm Pitch - 24 Modules - 100 A A9XPH224</h3><ul class="md-block-unordered-list-item"><li> This Acti9 product is a cuttable horizontal comb busbar 24 modules for Acti9 iC60 or Acti9 iK60. It is dedicated to N+1L installations. The type is NL (Neutral, Line). It is a set of 1 device. It is suitable for 12 devices (1P+N). The length is 430mm. The total number of modules of 18mm is 24. The pin cross section is 16mm2. The type of electric connection is PIN. The number of phase is 1. The number of poles is 2. The Ie rated operational current at 40°C is 100A The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 500VAC. The Ue rated operational voltage is 415VAC. The color of the device is white RAL9003. The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s. It complies with IEC 60947-7-1 and IEC 61439-2 standards. </li></ul>

<h3>SCHNEIDER ELECTRIC Acti 9 - Comb Busbar - 1L+N - 18 Mm Pitch - 24 Modules - 100 A A9XPH224</h3>
<ul>
<li>&nbsp;This Acti9 product is a cuttable horizontal comb busbar 24 modules for Acti9 iC60 or Acti9 iK60. It is dedicated to N+1L installations. The type is NL (Neutral, Line). It is a set of 1 device. It is suitable for 12 devices (1P+N). The length is 430mm. The total number of modules of 18mm is 24. The pin cross section is 16mm2. The type of electric connection is PIN. The number of phase is 1. The number of poles is 2. The Ie rated operational current at 40°C is 100A The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 500VAC. The Ue rated operational voltage is 415VAC. The color of the device is white RAL9003. The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s. It complies with IEC 60947-7-1 and IEC 61439-2 standards.&nbsp;</li>
</ul>

spec sheet (A9XPH224)

Schneider Electric A9XPH224 Comb Busbar - Acti 9

schneider electric a9xph224 comb busbar acti sisir bar bas sikat electric/施耐德电气 梳状母线 施耐德电气

schneider-electric-a9xph224-comb-busbar-acti-9

SCHNEIDER ELECTRIC Acti 9 - Comb Busbar - 1L+N With Aux - 18 Mm Pitch - 57 Modules - 100A A9XAH257
  

     This Acti9   product is a cuttable horizontal comb busbar 57 modules with 9mm auxiliary   for Acti9 iC60 or Acti9 iK60. It is dedicated to Aux+3L installations. The   type is AuxL1L2L3 (Auxiliary, Line). It is a set of 1 device. It is suitable   for 22 devices (3P) with associated auxiliaries. The length is 1000mm.The   total number of modules of 18mm is 57. The pin cross section is 16mm2. The   type of electric connection is PIN. The number of phase is 1. The number of   poles is 2. The pin cross section is 16mm2. The type of electric connection   is PIN. The Isc short circuit current is compatible with the breaking   capacity of Schneider Electric circuit breakers. The Ui rated insulation   voltage is 500VAC. The Ue rated operational voltage is 415VAC. The color of   the device is white RAL9003. The pollution degree is 3. According to IEC   60695-2-1 standard the fire resistance is self-extinguishing at 960°C within   30s. It complies with IEC 60947-7-1   and IEC 61439-2 standards.     

Accessory / separate part category:Connection accessory

<h3 class="md-block-header-three">SCHNEIDER ELECTRIC Acti 9 - Comb Busbar - 1L+N With Aux - 18 Mm Pitch - 57 Modules - 100A A9XAH257 </h3><ul class="md-block-unordered-list-item"><li> This Acti9 product is a cuttable horizontal comb busbar 57 modules with 9mm auxiliary for Acti9 iC60 or Acti9 iK60. It is dedicated to Aux+3L installations. The type is AuxL1L2L3 (Auxiliary, Line). It is a set of 1 device. It is suitable for 22 devices (3P) with associated auxiliaries. The length is 1000mm.The total number of modules of 18mm is 57. The pin cross section is 16mm2. The type of electric connection is PIN. The number of phase is 1. The number of poles is 2. The pin cross section is 16mm2. The type of electric connection is PIN. The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 500VAC. The Ue rated operational voltage is 415VAC. The color of the device is white RAL9003. The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s. It complies with IEC 60947-7-1 and IEC 61439-2 standards. </li><li>Range:Acti9</li><li>Product or component type:Comb busbar</li><li>Mounting mode:Horizontal</li><li>Accessory / separate part category:Connection accessory</li><li>lines description:1L + N</li><li>Length in 18 mm modules:57</li></ul>

<h3>SCHNEIDER ELECTRIC Acti 9 - Comb Busbar - 1L+N With Aux - 18 Mm Pitch - 57 Modules - 100A A9XAH257 
&nbsp;&nbsp;</h3>
<ul>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;This Acti9 product is a cuttable horizontal comb busbar 57 modules with 9mm auxiliary for Acti9 iC60 or Acti9 iK60. It is dedicated to Aux+3L installations. The type is AuxL1L2L3 (Auxiliary, Line). It is a set of 1 device. It is suitable for 22 devices (3P) with associated auxiliaries. The length is 1000mm.The total number of modules of 18mm is 57. The pin cross section is 16mm2. The type of electric connection is PIN. The number of phase is 1. The number of poles is 2. The pin cross section is 16mm2. The type of electric connection is PIN. The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 500VAC. The Ue rated operational voltage is 415VAC. The color of the device is white RAL9003. The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s. It complies with IEC 60947-7-1 and IEC 61439-2 standards.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>Range:Acti9</li>
<li>Product or component type:Comb busbar</li>
<li>Mounting mode:Horizontal</li>
<li>Accessory / separate part category:Connection accessory</li>
<li>lines description:1L + N</li>
<li>Length in 18 mm modules:57</li>
</ul>

Spec Sheet (A9XAH257)

Schneider Electric A9XAH257 Comb Busbar - Acti 9

schneider electric a9xah257 comb busbar acti sisir electric/施耐德电气 梳状母线 施耐德电气

schneider-electric-a9xah257-comb-busbar-acti-9

Abb F204 AC-63/0 Rccb 63A 4P 100MA 63/0.1 Elcb

Catalog Description:F204 AC-63/0.1 Residual Current Circuit Breaker 4P AC type 100 mA

Long Description:The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.

Rated Impulse Withstand Voltage (Uimp):4 kV

Rated Conditional Short-Circuit Current (Inc):10 kA

Rated Service Short-Circuit Breaking Capacity (Ics):1 kA

Power Loss:at Rated Operating Conditions per Pole 4.4 W

Rated Cross-Section:4 - Multi-Wired 0...25 mm²

<h3 class="md-block-header-three">Abb F204 AC-63/0 Rccb 63A 4P 100MA 63/0.1 Elcb</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:F204 AC-63/0.1</li><li>Product ID:2CSF204001R2630</li><li>EAN:8012542781707</li><li>Catalog Description:F204 AC-63/0.1 Residual Current Circuit Breaker 4P AC type 100 mA</li><li>Long Description:The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.</li><li>Unit of Measurement : PCS</li></ul>Technical<ul class="md-block-unordered-list-item"><li>Standards:IEC/EN 61008</li><li>UL 1053</li><li>Type of Residual Current:AC type</li><li>Rated Voltage (Ur):230/400 V</li><li>Rated Operational Voltage:230 / 400 V AC</li><li>Rated Insulation Voltage (Ui):500 V</li><li>Rated Impulse Withstand Voltage (Uimp):4 kV</li><li>Rated Current (In):63 A</li><li>Rated Residual Current:100 mA</li><li>Rated Conditional Short-Circuit Current (Inc):10 kA</li><li>Rated Service Short-Circuit Breaking Capacity (Ics):1 kA</li><li>Maximum Surge Current:0.25 kA</li><li>Leakage Current Type:AC</li><li>Rated Frequency (f):50 … 60 Hz</li><li>Power Loss:at Rated Operating Conditions per Pole 4.4 W</li><li>Power Supply Connection:Arbitrary</li><li>Electrical Endurance:10000 cycle</li><li>Number of Poles:4</li><li>Operating Characteristic:Instantaneous</li><li>Position of Neutral Terminals:Right</li><li>Mounting Type:DIN-Rail</li><li>Options Provided:None</li><li>Accessories Available:Yes</li><li>Connecting Capacity:Busbar 10 mm²</li><li>Rigid 25 ... 25 mm²</li><li>Flexible 25 ... 25 mm²</li><li>Rated Cross-Section:4 - Multi-Wired 0...25 mm²</li><li>1 - Solid-Core 25...25 mm²</li></ul>

<h3>Abb F204 AC-63/0 Rccb 63A 4P 100MA 63/0.1 Elcb</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:F204 AC-63/0.1</li>
<li>Product ID:2CSF204001R2630</li>
<li>EAN:8012542781707</li>
<li>Catalog Description:F204 AC-63/0.1 Residual Current Circuit Breaker 4P AC type 100 mA</li>
<li>Long Description:The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.</li>
<li>Unit of Measurement : PCS</li>
</ul>
Technical
<ul>
<li>Standards:IEC/EN 61008</li>
<li>UL 1053</li>
<li>Type of Residual Current:AC type</li>
<li>Rated Voltage (Ur):230/400 V</li>
<li>Rated Operational Voltage:230 / 400 V AC</li>
<li>Rated Insulation Voltage (Ui):500 V</li>
<li>Rated Impulse Withstand Voltage (Uimp):4 kV</li>
<li>Rated Current (In):63 A</li>
<li>Rated Residual Current:100 mA</li>
<li>Rated Conditional Short-Circuit Current (Inc):10 kA</li>
<li>Rated Service Short-Circuit Breaking Capacity (Ics):1 kA</li>
<li>Maximum Surge Current:0.25 kA</li>
<li>Leakage Current Type:AC</li>
<li>Rated Frequency (f):50 … 60 Hz</li>
<li>Power Loss:at Rated Operating Conditions per Pole 4.4 W</li>
<li>Power Supply Connection:Arbitrary</li>
<li>Electrical Endurance:10000 cycle</li>
<li>Number of Poles:4</li>
<li>Operating Characteristic:Instantaneous</li>
<li>Position of Neutral Terminals:Right</li>
<li>Mounting Type:DIN-Rail</li>
<li>Options Provided:None</li>
<li>Accessories Available:Yes</li>
<li>Connecting Capacity:Busbar 10 mm²</li>
<li>Rigid 25 ... 25 mm²</li>
<li>Flexible 25 ... 25 mm²</li>
<li>Rated Cross-Section:4 - Multi-Wired 0...25 mm²</li>
<li>1 - Solid-Core 25...25 mm²</li>
</ul>

abb f204 ac-63/0 rccb 63a 4p 100ma 63/0.1 elcb circuit breaker pemutus arus litar 断路器

abb-f204-ac-63-0-rccb-63a-4p-100ma-63-0-1-elcb

Abb F202 A-63/0.03 Rccb 63A 2P 30MA 63/0.03 Type a Elcb

Catalog Description:F202 AC-63/0.03 Residual Current Circuit Breaker 2P AC type 30 mA

Power Loss:at Rated Operating Conditions per Pole 3.2 W

Options Provided:None, Suitable for 110V applications

<h3 class="md-block-header-three">Abb F202 A-63/0.03 Rccb 63A 2P 30MA 63/0.03 Type a Elcb</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:F202 AC-63/0.03</li><li>Product ID:2CSF202001R1630</li><li>EAN:8012542780205</li><li>Catalog Description:F202 AC-63/0.03 Residual Current Circuit Breaker 2P AC type 30 mA</li><li>Long Description:The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.</li><li>Unit of Measurement : PCS</li></ul>Technical<ul class="md-block-unordered-list-item"><li>Standards:IEC 61008</li><li>UL 1053</li><li>Type of Residual Current:A type</li><li>Rated Voltage (Ur):230 V</li><li>Rated Operational Voltage:230 V</li><li>Rated Insulation Voltage (Ui):500 V</li><li>Test Voltage (Ut):110 V</li><li>Rated Impulse Withstand Voltage (Uimp):4 kV</li><li>Input Voltage Type:AC</li><li>Rated Current (In):63 A</li><li>Rated Residual Current:30 mA</li><li>Rated Conditional Short-Circuit Current (Inc):10 kA</li><li>Rated Service Short-Circuit Breaking Capacity (Ics):1 kA</li><li>Leakage Current Type:A</li><li>Rated Frequency (f):50 … 60 Hz</li><li>Power Loss:at Rated Operating Conditions per Pole 3.2 W</li><li>Power Supply Connection:Arbitrary</li><li>Electrical Endurance:10000 cycle</li><li>Number of Poles:2</li><li>Operating Characteristic:Instantaneous</li><li>Mounting Type:DIN-Rail</li><li>Options Provided:None, Suitable for 110V applications</li><li>Accessories Available:Yes</li><li>Connecting Capacity:Busbar 10 mm²</li><li>Rigid 25 ... 25 mm²</li><li>Flexible 25 ... 25 mm²</li><li>Rated Cross-Section:4 - Multi-Wired 0...25 mm²</li><li>1 - Solid-Core 25...25 mm²</li></ul>

<h3>Abb F202 A-63/0.03 Rccb 63A 2P 30MA 63/0.03 Type a Elcb</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:F202 AC-63/0.03</li>
<li>Product ID:2CSF202001R1630</li>
<li>EAN:8012542780205</li>
<li>Catalog Description:F202 AC-63/0.03 Residual Current Circuit Breaker 2P AC type 30 mA</li>
<li>Long Description:The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.</li>
<li>Unit of Measurement : PCS</li>
</ul>
Technical
<ul>
<li>Standards:IEC 61008</li>
<li>UL 1053</li>
<li>Type of Residual Current:A type</li>
<li>Rated Voltage (Ur):230 V</li>
<li>Rated Operational Voltage:230 V</li>
<li>Rated Insulation Voltage (Ui):500 V</li>
<li>Test Voltage (Ut):110 V</li>
<li>Rated Impulse Withstand Voltage (Uimp):4 kV</li>
<li>Input Voltage Type:AC</li>
<li>Rated Current (In):63 A</li>
<li>Rated Residual Current:30 mA</li>
<li>Rated Conditional Short-Circuit Current (Inc):10 kA</li>
<li>Rated Service Short-Circuit Breaking Capacity (Ics):1 kA</li>
<li>Leakage Current Type:A</li>
<li>Rated Frequency (f):50 … 60 Hz</li>
<li>Power Loss:at Rated Operating Conditions per Pole 3.2 W</li>
<li>Power Supply Connection:Arbitrary</li>
<li>Electrical Endurance:10000 cycle</li>
<li>Number of Poles:2</li>
<li>Operating Characteristic:Instantaneous</li>
<li>Mounting Type:DIN-Rail</li>
<li>Options Provided:None, Suitable for 110V applications</li>
<li>Accessories Available:Yes</li>
<li>Connecting Capacity:Busbar 10 mm²</li>
<li>Rigid 25 ... 25 mm²</li>
<li>Flexible 25 ... 25 mm²</li>
<li>Rated Cross-Section:4 - Multi-Wired 0...25 mm²</li>
<li>1 - Solid-Core 25...25 mm²</li>
</ul>

abb f202 a-63/0.03 rccb 63a 2p 30ma 63/0.03 type elcb tipe circuit breaker pemutus arus taipkan litar a型elcb 断路器

abb-f202-a-63-0-03-rccb-63a-2p-30ma-63-0-03-type-a-elcb

Schneider Electric Acti 9 - Comb Busbar - 3L+N - 18 Mm Pitch - 24 Modules - 100 a A9XPH424

This Acti9 product is a cuttable horizontal comb busbar 24 modules for Acti9 iC60 or Acti9 iK60. It is dedicated to N+3L installations. The type is NL1L2L3 (Neutral, Line). It is a set of 1 device. It is suitable for 6 devices (3P+N). The length is 430mm.The total number of modules of 18mm is 24. The pin cross section is 16mm2. The type of electric connection is PIN. The number of phase is 3. The number of poles is 4. The pin cross section is 16mm2. The type of electric connection is PIN. The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 500VAC. The Ue rated operational voltage is 415VAC. The color of the device is white RAL9003. The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s.   It complies with IEC 60947-7-1 and IEC 61439-2 standards.          

<h3 class="md-block-header-three">Schneider Electric Acti 9 - Comb Busbar - 3L+N - 18 Mm Pitch - 24 Modules - 100 a A9XPH424</h3>This Acti9 product is a cuttable horizontal comb busbar 24 modules for Acti9 iC60 or Acti9 iK60. It is dedicated to N+3L installations. The type is NL1L2L3 (Neutral, Line). It is a set of 1 device. It is suitable for 6 devices (3P+N). The length is 430mm.The total number of modules of 18mm is 24. The pin cross section is 16mm2. The type of electric connection is PIN. The number of phase is 3. The number of poles is 4. The pin cross section is 16mm2. The type of electric connection is PIN. The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 500VAC. The Ue rated operational voltage is 415VAC. The color of the device is white RAL9003. The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s. It complies with IEC 60947-7-1 and IEC 61439-2 standards.

<h3>Schneider Electric Acti 9 - Comb Busbar - 3L+N - 18 Mm Pitch - 24 Modules - 100 a A9XPH424</h3>
This Acti9 product is a cuttable horizontal comb busbar 24 modules for Acti9 iC60 or Acti9 iK60. It is dedicated to N+3L installations. The type is NL1L2L3 (Neutral, Line). It is a set of 1 device. It is suitable for 6 devices (3P+N). The length is 430mm.The total number of modules of 18mm is 24. The pin cross section is 16mm2. The type of electric connection is PIN. The number of phase is 3. The number of poles is 4. The pin cross section is 16mm2. The type of electric connection is PIN. The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 500VAC. The Ue rated operational voltage is 415VAC. The color of the device is white RAL9003. The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s. It complies with IEC 60947-7-1 and IEC 61439-2 standards.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

A9XPH424

Schneider Electric A9XPH424 Comb Busbar - Acti 9

schneider electric a9xph424 comb busbar acti sisir bar bas sikat electric/施耐德电气 梳状母线 施耐德电气

schneider-electric-a9xph424-comb-busbar-acti-9

SCHNEIDER ELECTRIC Residual Current Breaker With Overcurrent Protection (rcbo), Acti9 Idpn N Vigi, 1P+N, 10A, C Curve, 6000A, Ac Type, 30mA A9D31610

<h3 class="md-block-header-three">SCHNEIDER ELECTRIC Residual Current Breaker With Overcurrent Protection (rcbo), Acti9 Idpn N Vigi, 1P+N, 10A, C Curve, 6000A, Ac Type, 30mA A9D31610</h3><ul class="md-block-unordered-list-item"><li>This Acti9 iDPN Vigi is a modular residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole, 10A In rated current and C tripping curve. The earth leakage protection class is AC type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The Icn rated short circuit breaking capacity is up to 6000A according EN/IEC 61009-2-1 standard. This product protects against short circuit, cable overload, electrical shock by indirect contact and fire hazards. Its earth fault indicator on front face allows quick identification of the type of default. It can be fitted instead of a miniature circuit breaker for complete protection of one circuit. This product is compliant with EN/IEC 61009-2-1 standard. It has an electrical endurance going up to 20000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 220VAC to 240VAC. The Ui rated insulation voltage is 400VAC. The Uimp rated impulse withstand voltage is 4kV. The frequency is 50Hz. It is DIN rail mountable. The width in 9mm pitches is 4. The product color is white (RAL9003). The dimensions are (W) 36mm x (H) 85mm x (D) 73mm. The weight is 125g. It has an IP20 degree of protection (as per IEC/EN 60529 standard) and becomes IP40 once in modular enclosure. The operating temperature is from -5°C to 60°C. The storage temperature is from -40°C to 85°C.</li><li>Range:Acti9</li><li>Product name:Acti9 iDPN Vigi</li><li>Product or component type:Residual current breaker with overcurrent protection (RCBO)</li><li>Device short name:IDPN N Vigi</li><li>Device application:Distribution</li><li>Poles description:1P + N</li><li>Number of protected poles:1</li><li>Neutral position:Left</li><li>[In] rated current:10 A</li><li>Network type:AC</li><li>Colour:White</li></ul>

<h3>SCHNEIDER ELECTRIC Residual Current Breaker With Overcurrent Protection (rcbo), Acti9 Idpn N Vigi, 1P+N, 10A, C Curve, 6000A, Ac Type, 30mA A9D31610</h3>
<ul>
<li>This Acti9 iDPN Vigi is a modular residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole, 10A In rated current and C tripping curve. The earth leakage protection class is AC type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The Icn rated short circuit breaking capacity is up to 6000A according EN/IEC 61009-2-1 standard. This product protects against short circuit, cable overload, electrical shock by indirect contact and fire hazards. Its earth fault indicator on front face allows quick identification of the type of default. It can be fitted instead of a miniature circuit breaker for complete protection of one circuit. This product is compliant with EN/IEC 61009-2-1 standard. It has an electrical endurance going up to 20000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 220VAC to 240VAC. The Ui rated insulation voltage is 400VAC. The Uimp rated impulse withstand voltage is 4kV. The frequency is 50Hz. It is DIN rail mountable. The width in 9mm pitches is 4. The product color is white (RAL9003). The dimensions are (W) 36mm x (H) 85mm x (D) 73mm. The weight is 125g. It has an IP20 degree of protection (as per IEC/EN 60529 standard) and becomes IP40 once in modular enclosure. The operating temperature is from -5°C to 60°C. The storage temperature is from -40°C to 85°C.</li>
<li>Range:Acti9</li>
<li>Product name:Acti9 iDPN Vigi</li>
<li>Product or component type:Residual current breaker with overcurrent protection (RCBO)</li>
<li>Device short name:IDPN N Vigi</li>
<li>Device application:Distribution</li>
<li>Poles description:1P + N</li>
<li>Number of protected poles:1</li>
<li>Neutral position:Left</li>
<li>[In] rated current:10 A</li>
<li>Network type:AC</li>
<li>Colour:White</li>
</ul>

Schneider Electric A9D31610 Residual Current Breaker With Overcurrent Protection (rcbo), Acti9 Idpn N Vigi, 1P+N, 10A, C Curve, 6000A, Ac Type, 30mA

schneider electric a9d31610 residual current breaker overcurrent protection (rcbo), acti9 idpn vigi, 1p+n, 10a, curve, 6000a, ac type, 30ma pemutus arus residu dengan perlindungan berlebih kurva c, tipe ac, devices rcds baki lebih lengkung jenis electric/施耐德电气 带过流保护的剩余电流断路器 (rcbo)、acti9 vigi、1p+n、10a、c 曲线、6000a、交流型、30ma 施耐德电气