Facom

Golden Eagle

Material Handling

material-handling

Ladders & Platforms

ladders-platforms

Mechanical Parts

mechanical-parts

O Ring

o-ring

Other Hand Tools

other-hand-tools

Other Tools

other-tools

Golden Eagle FGA-C-03 Fiberglass 'a' Frame Ladder Ch 96.5cm X Oh 88cm X Fw 44cm 

<h3 class="md-block-header-three">Golden Eagle FGA-C-03 Fiberglass &#x27;a&#x27; Frame Ladder Ch 96.5cm X Oh 88cm X Fw 44cm </h3><ul class="md-block-unordered-list-item"><li>Closed Height: 965 MM</li><li>Open Height: 880 MM</li><li>Foot Width: 440 MM</li><li>Weight: 4.4 KG</li></ul>

<h3>Golden Eagle FGA-C-03 Fiberglass 'a' Frame Ladder Ch 96.5cm X Oh 88cm X Fw 44cm&nbsp;</h3>
<ul>
<li>Closed Height: 965 MM</li>
<li>Open Height: 880 MM</li>
<li>Foot Width: 440 MM</li>
<li>Weight: 4.4 KG</li>
</ul>

FGA-C-03 Fiberglass 'a' Frame Ladder Closed Height 96.5cm X Open Height 88cm X Foot Width 44cm - EN131 Compliant

fga-c-03 fiberglass 'a' frame ladder closed height 96.5cm open 88cm foot width 44cm en131 compliant tangga bingkai tinggi tertutup 96,5cm terbuka lebar kaki sesuai ladders platforms platform golden eagle gentian kaca eagle/金鹰 玻璃纤维“a”形梯子 闭合高度 96.5 厘米 打开高度 88 脚宽 44 符合 标准 梯子和平台 金鹰

fga-c-03-fiberglass-a-frame-ladder-closed-height-96-5cm-x-open-height-88cm-x-foot-width-44cm-en131-compliant

Golden Eagle FGA-C-10 Fiberglass 'a' Frame Ladder Ch 310cm X Oh 289cm X Fw 72cm 

<h3 class="md-block-header-three">Golden Eagle FGA-C-10 Fiberglass &#x27;a&#x27; Frame Ladder Ch 310cm X Oh 289cm X Fw 72cm </h3><ul class="md-block-unordered-list-item"><li>Closed Height: 3100 MM</li><li>Open Height: 2890 MM</li><li>Foot Width: 720 MM</li><li>Weight: 13.1 KG</li></ul>

<h3>Golden Eagle FGA-C-10 Fiberglass 'a' Frame Ladder Ch 310cm X Oh 289cm X Fw 72cm&nbsp;</h3>
<ul>
<li>Closed Height: 3100 MM</li>
<li>Open Height: 2890 MM</li>
<li>Foot Width: 720 MM</li>
<li>Weight: 13.1 KG</li>
</ul>

FGA-C-10 Fiberglass 'a' Frame Ladder Closed Height 310cm X Open Height 289cm X Foot Width 72cm - EN131 Compliant

fga-c-10 fiberglass 'a' frame ladder closed height 310cm open 289cm foot width 72cm en131 compliant tangga bingkai tinggi tertutup terbuka lebar kaki sesuai ladders platforms platform golden eagle gentian kaca 310sm 289sm 72sm mematuhi eagle/金鹰 玻璃纤维“a”形梯子闭合高度 310 厘米 打开高度 289 脚宽 72 符合 标准 梯子和平台 金鹰

fga-c-10-fiberglass-a-frame-ladder-closed-height-310cm-x-open-height-289cm-x-foot-width-72cm-en131-compliant

Golden Eagle FGA-C-04 Fiberglass 'a' Frame Ladder Ch 127cm X Oh 116cm X Fw 48cm 

<h3 class="md-block-header-three">Golden Eagle FGA-C-04 Fiberglass &#x27;a&#x27; Frame Ladder Ch 127cm X Oh 116cm X Fw 48cm </h3><ul class="md-block-unordered-list-item"><li>Closed Height: 1270 MM</li><li>Open Height: 1160 MM</li><li>Foot Width: 480 MM</li><li>Weight: 5.5 KG</li></ul>

<h3>Golden Eagle FGA-C-04 Fiberglass 'a' Frame Ladder Ch 127cm X Oh 116cm X Fw 48cm&nbsp;</h3>
<ul>
<li>Closed Height: 1270 MM</li>
<li>Open Height: 1160 MM</li>
<li>Foot Width: 480 MM</li>
<li>Weight: 5.5 KG</li>
</ul>

FGA-C-04 Fiberglass 'a' Frame Ladder Closed Height 127cm X Open Height 116cm X Foot Width 48cm - EN131 Compliant

fga-c-04 fiberglass 'a' frame ladder closed height 127cm open 116cm foot width 48cm en131 compliant tangga bingkai tinggi tertutup terbuka lebar kaki sesuai ladders platforms platform golden eagle gentian kaca 127sm 116sm 48sm mematuhi eagle/金鹰 玻璃纤维“a”形梯子闭合高度 127 厘米 打开高度 116 脚宽 48 符合 标准 梯子和平台 金鹰

fga-c-04-fiberglass-a-frame-ladder-closed-height-127cm-x-open-height-116cm-x-foot-width-48cm-en131-compliant

Golden Eagle FGA-C-12 Fiberglass 'a' Frame Ladder Ch 371cm X Oh 346cm X Fw 80cm 

<h3 class="md-block-header-three">Golden Eagle FGA-C-12 Fiberglass &#x27;a&#x27; Frame Ladder Ch 371cm X Oh 346cm X Fw 80cm </h3><ul class="md-block-unordered-list-item"><li>Closed Height: 3710 MM</li><li>Open Height: 3460 MM</li><li>Foot Width: 800 MM</li><li>Weight: 16.6 KG</li></ul>

<h3>Golden Eagle FGA-C-12 Fiberglass 'a' Frame Ladder Ch 371cm X Oh 346cm X Fw 80cm&nbsp;</h3>
<ul>
<li>Closed Height: 3710 MM</li>
<li>Open Height: 3460 MM</li>
<li>Foot Width: 800 MM</li>
<li>Weight: 16.6 KG</li>
</ul>

FGA-C-12 Fiberglass 'a' Frame Ladder Closed Height 371cm X Open Height 346cm X Foot Width 80cm - EN131 Compliant

fga-c-12 fiberglass 'a' frame ladder closed height 371cm open 346cm foot width 80cm en131 compliant tangga bingkai tinggi tertutup terbuka lebar kaki sesuai ladders platforms platform golden eagle gentian kaca 371sm 346sm 80sm mematuhi eagle/金鹰 玻璃纤维“a”形梯子闭合高度 371 厘米 打开高度 346 脚宽 80 符合 标准 梯子和平台 金鹰

fga-c-12-fiberglass-a-frame-ladder-closed-height-371cm-x-open-height-346cm-x-foot-width-80cm-en131-compliant

Golden Eagle FGA-C-08 Fiberglass 'a' Frame Ladder Ch 249cm X Oh 230cm X Fw 64cm 

<h3 class="md-block-header-three">Golden Eagle FGA-C-08 Fiberglass &#x27;a&#x27; Frame Ladder Ch 249cm X Oh 230cm X Fw 64cm </h3><ul class="md-block-unordered-list-item"><li>Closed Height: 2490 MM</li><li>Open Height: 2300 MM</li><li>Foot Width: 640 MM</li><li>Weight: 9.9 KG</li></ul>

<h3>Golden Eagle FGA-C-08 Fiberglass 'a' Frame Ladder Ch 249cm X Oh 230cm X Fw 64cm&nbsp;</h3>
<ul>
<li>Closed Height: 2490 MM</li>
<li>Open Height: 2300 MM</li>
<li>Foot Width: 640 MM</li>
<li>Weight: 9.9 KG</li>
</ul>

FGA-C-08 Fiberglass 'a' Frame Ladder Closed Height 249cm X Open Height 230cm X Foot Width 64cm - EN131 Compliant

fga-c-08 fiberglass 'a' frame ladder closed height 249cm open 230cm foot width 64cm en131 compliant tangga bingkai tinggi tertutup terbuka lebar kaki sesuai ladders platforms platform golden eagle gentian kaca 249sm 230sm 64sm mematuhi eagle/金鹰 玻璃纤维“a”形梯子闭合高度 249 厘米 打开高度 230 脚宽 64 符合 标准 梯子和平台 金鹰

fga-c-08-fiberglass-a-frame-ladder-closed-height-249cm-x-open-height-230cm-x-foot-width-64cm-en131-compliant

Golden Eagle FGA-C-09 Fiberglass 'a' Frame Ladder Ch 279.5cm X Oh 257cm X Fw 68cm 

<h3 class="md-block-header-three">Golden Eagle FGA-C-09 Fiberglass &#x27;a&#x27; Frame Ladder Ch 279.5cm X Oh 257cm X Fw 68cm </h3><ul class="md-block-unordered-list-item"><li>Closed Height: 2795 MM</li><li>Open Height: 2570 MM</li><li>Foot Width: 680 MM</li><li>Weight: 11.4 KG</li></ul>

<h3>Golden Eagle FGA-C-09 Fiberglass 'a' Frame Ladder Ch 279.5cm X Oh 257cm X Fw 68cm&nbsp;</h3>
<ul>
<li>Closed Height: 2795 MM</li>
<li>Open Height: 2570 MM</li>
<li>Foot Width: 680 MM</li>
<li>Weight: 11.4 KG</li>
</ul>

FGA-C-09 Fiberglass 'a' Frame Ladder Closed Height 279.5cm X Open Height 257cm X Foot Width 68cm - EN131 Compliant

fga-c-09 fiberglass 'a' frame ladder closed height 279.5cm open 257cm foot width 68cm en131 compliant tangga bingkai tinggi tertutup 279,5cm terbuka lebar kaki sesuai ladders platforms platform golden eagle gentian kaca eagle/金鹰 玻璃纤维“a”形梯子闭合高度 279.5 厘米 打开高度 257 脚宽 68 符合 标准 梯子和平台 金鹰

fga-c-09-fiberglass-a-frame-ladder-closed-height-279-5cm-x-open-height-257cm-x-foot-width-68cm-en131-compliant

Golden Eagle FGA-C-D6 Fiberglass 'a' Frame Ladder Ch 188cm X Oh 173cm X Fw 56cm 

<h3 class="md-block-header-three">Golden Eagle FGA-C-D6 Fiberglass &#x27;a&#x27; Frame Ladder Ch 188cm X Oh 173cm X Fw 56cm </h3><ul class="md-block-unordered-list-item"><li>Closed Height: 1880 MM</li><li>Open Height: 1730 MM</li><li>Foot Width: 560 MM</li><li>Weight: 7.7 KG</li></ul>

<h3>Golden Eagle FGA-C-D6 Fiberglass 'a' Frame Ladder Ch 188cm X Oh 173cm X Fw 56cm&nbsp;</h3>
<ul>
<li>Closed Height: 1880 MM</li>
<li>Open Height: 1730 MM</li>
<li>Foot Width: 560 MM</li>
<li>Weight: 7.7 KG</li>
</ul>

FGA-C-D6 Fiberglass 'a' Frame Ladder Closed Height 188cm X Open Height 173cm X Foot Width 56cm - EN131 Compliant

fga-c-d6 fiberglass 'a' frame ladder closed height 188cm open 173cm foot width 56cm en131 compliant tangga bingkai tinggi tertutup terbuka lebar kaki sesuai ladders platforms platform golden eagle gentian kaca 188sm 173sm 56sm mematuhi eagle/金鹰 玻璃纤维“a”形梯子闭合高度 188 厘米 打开高度 173 脚宽 56 符合 标准 梯子和平台 金鹰

fga-c-d6-fiberglass-a-frame-ladder-closed-height-188cm-x-open-height-173cm-x-foot-width-56cm-en131-compliant

Golden Eagle FGA-C-07 Fiberglass 'a' Frame Ladder Ch 218.5cm X Oh 201cm X Fw 60cm 

<h3 class="md-block-header-three">Golden Eagle FGA-C-07 Fiberglass &#x27;a&#x27; Frame Ladder Ch 218.5cm X Oh 201cm X Fw 60cm </h3><ul class="md-block-unordered-list-item"><li>Closed Height: 2185 MM</li><li>Open Height: 2010 MM</li><li>Foot Width: 600 MM</li><li>Weight: 8.9 KG</li></ul>

<h3>Golden Eagle FGA-C-07 Fiberglass 'a' Frame Ladder Ch 218.5cm X Oh 201cm X Fw 60cm&nbsp;</h3>
<ul>
<li>Closed Height: 2185 MM</li>
<li>Open Height: 2010 MM</li>
<li>Foot Width: 600 MM</li>
<li>Weight: 8.9 KG</li>
</ul>

FGA-C-07 Fiberglass 'a' Frame Ladder Closed Height 218.5cm X Open Height 201cm X Foot Width 60cm - EN131 Compliant

fga-c-07 fiberglass 'a' frame ladder closed height 218.5cm open 201cm foot width 60cm en131 compliant tangga bingkai tinggi tertutup 218,5cm terbuka lebar kaki sesuai ladders platforms platform golden eagle gentian kaca eagle/金鹰 玻璃纤维“a”形梯子 闭合高度 218.5 厘米 打开高度 201 脚宽 60 符合 标准 梯子和平台 金鹰

fga-c-07-fiberglass-a-frame-ladder-closed-height-218-5cm-x-open-height-201cm-x-foot-width-60cm-en131-compliant

Golden Eagle FGA-C-05 Fiberglass 'a' Frame Ladder Ch 157.5cm X Oh 144cm X Fw 52cm 

<h3 class="md-block-header-three">Golden Eagle FGA-C-05 Fiberglass &#x27;a&#x27; Frame Ladder Ch 157.5cm X Oh 144cm X Fw 52cm </h3><ul class="md-block-unordered-list-item"><li>Closed Height: 1575 MM</li><li>Open Height: 1440 MM</li><li>Foot Width: 520 MM</li><li>Weight: 6.5 KG</li></ul>

<h3>Golden Eagle FGA-C-05 Fiberglass 'a' Frame Ladder Ch 157.5cm X Oh 144cm X Fw 52cm&nbsp;</h3>
<ul>
<li>Closed Height: 1575 MM</li>
<li>Open Height: 1440 MM</li>
<li>Foot Width: 520 MM</li>
<li>Weight: 6.5 KG</li>
</ul>

FGA-C-05 Fiberglass 'a' Frame Ladder Closed Height 157.5cm X Open Height 144cm X Foot Width 52cm - EN131 Compliant

fga-c-05 fiberglass 'a' frame ladder closed height 157.5cm open 144cm foot width 52cm en131 compliant tangga bingkai tinggi tertutup 157,5cm terbuka lebar kaki sesuai ladders platforms platform golden eagle gentian kaca eagle/金鹰 玻璃纤维“a”形梯子闭合高度 157.5 厘米 打开高度 144 脚宽 52 符合 标准 梯子和平台 金鹰

fga-c-05-fiberglass-a-frame-ladder-closed-height-157-5cm-x-open-height-144cm-x-foot-width-52cm-en131-compliant

<h3 class="md-block-header-three">Facom Retaining Pin 3 X 20mm GA.20A</h3>

<h3>Facom Retaining Pin 3 X 20mm GA.20A</h3>

Desmond Poh

Proto

RIDGID TOOLS

Pelican

Enerpac

STANLEY

MILWAUKEE TOOL

Heyco

Impact Sockets

Drills, Impact Drivers & Wrenches

Sockets

Screwdrivers

Socket Sets

Combination Spanners

Torque Wrenches

Hex Keys & Sets

May Wong

buyerIntroduction

Facom Retaining Pin 3 X 20mm GA.20A

facom retaining pin 20mm ga.20a penahan tools alat lainnya alatan lain facom/法康 固定销 其他工具 法康

facom-retaining-pin-3-x-20mm-ga-20a

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING JIS B2401 P41 ID 40.70 x CS 3.50Material : Nitrile (NBR) 90 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/wy9UQLLmclDLQ0KP70SlVj.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 P41
&nbsp;ID 40.70 x CS 3.50
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:3lulj"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/wy9UQLLmclDLQ0KP70SlVj.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="3lulj" 
 layout="nodisplay"></amp-image-lightbox>

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

ORING JIS B2401 P41 ID 40.70 x CS 3.50 Nitrile (NBR) 90 Shore

oring jis b2401 p41 id 40.70 x cs 3.50 nitrile (nbr) 90 shore o ring o-ring oem gelang oem/oem代工 3.50腈（nbr）90肖氏 o型圈 oem代工

oring-jis-b2401-p41-id-40-70-x-cs-3-50-nitrile-nbr-90-shore

Silicone O-Rings are sometimes referred to VMQ O-Rings.

Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility. 

In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.

Overview on Application Rating for Material Silicone 

Heat Ozone & Aging Resistance - Excellent

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.

ORING JIS B2401 P41 ID 40.70 x CS 3.50Material : Silicone 70 Shore Silicone O-Rings are sometimes referred to VMQ O-Rings.Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59&#x60;C to 232&#x60;C) and it has good retention of compression and flexibility. In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.Temperature Range (Dry Heat)Low: -75&#x60;F / -59&#x60;C High: 450&#x60;F / 232&#x60;COverview on Application Rating for Material Silicone Properties (Rating)Oils &amp; Grease - FairTear Strength – PoorFuel Resistance - PoorHeat Ozone &amp; Aging Resistance - ExcellentWater Swell Resistance - ExcellentAbrasion Resistance - PoorOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/MNEUbkwISuMz1CFdhZavxp.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 P41
&nbsp;ID 40.70 x CS 3.50
Material : Silicone 70 Shore&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
Silicone O-Rings are sometimes referred to VMQ O-Rings.
Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility.&nbsp;
In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.
<ins>Temperature Range (Dry Heat)</ins>
Low: -75`F / -59`C High: 450`F / 232`C
<ins>Overview on Application Rating for Material Silicone </ins>
Properties (Rating)
Oils &amp; Grease - Fair
Tear Strength – Poor
Fuel Resistance - Poor
Heat Ozone &amp; Aging Resistance - Excellent
Water Swell Resistance - Excellent
Abrasion Resistance - Poor
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:86tu0"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/MNEUbkwISuMz1CFdhZavxp.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="86tu0" 
 layout="nodisplay"></amp-image-lightbox>

ORING JIS B2401 P41 ID 40.70 x CS 3.50 Silicone 70 Shore

oring jis b2401 p41 id 40.70 x cs 3.50 silicone 70 shore silikon o ring o-ring oem gelang oem/oem代工 3.50硅胶70肖氏 o型圈 oem代工

oring-jis-b2401-p41-id-40-70-x-cs-3-50-silicone-70-shore

ORING JIS B2401 P41 ID 40.70 x CS 3.50Material : Nitrile (NBR) 70 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/o8BGLv~XhQ~qVh3935ZUqo.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 P41&nbsp;
ID 40.70 x CS 3.50
Material : Nitrile (NBR) 70 Shore
&nbsp;&nbsp;
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:6afjh"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/o8BGLv~XhQ~qVh3935ZUqo.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="6afjh" 
 layout="nodisplay"></amp-image-lightbox>