RFS Hydraulics

Plumbing & Sanitary

plumbing-sanitary

Flanges

flanges

Rfs FL-SQ-H-R-KB-280-40 Kb Type Square Flange Flat Side, 2 1/2" Socket Weld, Carbon Steel Material, Working Pressure up to 280 kg/cm²  

This is a flat side square flange of KAB series. Size availability between 1/2" to 2 1/2" with socket weld (weld-in) connection. This square flange is able to withstand maximum pressure up to 280 KGF/CM2 and is made to JIS F7806 standard. 

Square flange is used to connect to a plain end pipes or component, allowing a seamless flow of liquid throughout the hydraulic system. It is commonly used in high-pressure connections with small diameter pipes. To create a strong leak proof connection, welding will be done at the recessed part of the flange. A complete set of square flange has 4 components. One flat flange, one O-ring flange, 4 pieces of hexagon or Allen cap screws, and 1 piece of NBR O-ring. 

There are 4 types of square flange configurations;

· SHAB is commonly used in the hydraulic industry with a maximum working pressure of 210kg/cm². It is installed with hexagon bolts. 

· SSAB has a smaller body than SHAB. It also has a maximum working pressure of 210kg/cm² and it is installed using Allan cap screws. 

· KAB flanges are able to withstand higher working pressure up to 280kg/cm² or 350kg/cm², depending on the type. It has a similar configuration method as SHAB. 

· Blind square flange is used to terminate the end connection of a fluid flow.

1. Ensure the surface of the flanges are clean.

3. Next, position the flanges & the bolts correspondingly to the holes.

Tighten with a spanner for maximum tightness 

<h3 class="md-block-header-three">Rfs FL-SQ-H-R-KB-280-40 Kb Type Square Flange Flat Side, 2 1/2&quot; Socket Weld, Carbon Steel Material, Working Pressure up to 280 kg/cm² </h3>This is a flat side square flange of KAB series. Size availability between 1/2&quot; to 2 1/2&quot; with socket weld (weld-in) connection. This square flange is able to withstand maximum pressure up to 280 KGF/CM2 and is made to JIS F7806 standard. WHAT IS A SQUARE FLANGE?Square flange is used to connect to a plain end pipes or component, allowing a seamless flow of liquid throughout the hydraulic system. It is commonly used in high-pressure connections with small diameter pipes. To create a strong leak proof connection, welding will be done at the recessed part of the flange. A complete set of square flange has 4 components. One flat flange, one O-ring flange, 4 pieces of hexagon or Allen cap screws, and 1 piece of NBR O-ring. WHAT ARE THE AVAILABLE CONFIGURATIONS?There are 4 types of square flange configurations;· SHAB is commonly used in the hydraulic industry with a maximum working pressure of 210kg/cm². It is installed with hexagon bolts. · SSAB has a smaller body than SHAB. It also has a maximum working pressure of 210kg/cm² and it is installed using Allan cap screws. · KAB flanges are able to withstand higher working pressure up to 280kg/cm² or 350kg/cm², depending on the type. It has a similar configuration method as SHAB. · Blind square flange is used to terminate the end connection of a fluid flow.HOW DO I INSTALL SQUARE FLANGE?1. Ensure the surface of the flanges are clean.2. Lubricate the o-ring.3. Next, position the flanges &amp; the bolts correspondingly to the holes.Tighten with a spanner for maximum tightness

<h3>Rfs FL-SQ-H-R-KB-280-40 Kb Type Square Flange Flat Side, 2 1/2" Socket Weld, Carbon Steel Material, Working Pressure up to 280 kg/cm²&nbsp;&nbsp;</h3>
This is a flat side square flange of KAB series. Size availability between 1/2" to 2 1/2" with socket weld (weld-in) connection. This square flange is able to withstand maximum pressure up to 280 KGF/CM2 and is made to JIS F7806 standard.&nbsp;
WHAT IS A SQUARE FLANGE?
Square flange is used to connect to a plain end pipes or component, allowing a seamless flow of liquid throughout the hydraulic system. It is commonly used in high-pressure connections with small diameter pipes. To create a strong leak proof connection, welding will be done at the recessed part of the flange. A complete set of square flange has 4 components. One flat flange, one O-ring flange, 4 pieces of hexagon or Allen cap screws, and 1 piece of NBR O-ring.&nbsp;
WHAT ARE THE AVAILABLE CONFIGURATIONS?
There are 4 types of square flange configurations;
· SHAB is commonly used in the hydraulic industry with a maximum working pressure of 210kg/cm². It is installed with hexagon bolts.&nbsp;
· SSAB has a smaller body than SHAB. It also has a maximum working pressure of 210kg/cm² and it is installed using Allan cap screws.&nbsp;
· KAB flanges are able to withstand higher working pressure up to 280kg/cm² or 350kg/cm², depending on the type. It has a similar configuration method as SHAB.&nbsp;
· Blind square flange is used to terminate the end connection of a fluid flow.
HOW DO I INSTALL SQUARE FLANGE?
1. Ensure the surface of the flanges are clean.
2. Lubricate the o-ring.
3. Next, position the flanges &amp; the bolts correspondingly to the holes.
Tighten with a spanner for maximum tightness&nbsp;

AF Hydro

Oleo Tecnica

BOTHWELL

LAME

Stauff

Others

MJ Technos

LY Metal

Pipe Clamps

Pipe Coupling

Ferrule Fittings

Pipe Adaptor

Pipe Elbow

Pipe Nipple

Pipe Tee

Camlock Fittings

Copper Tubing

Kelvin How

buyerIntroduction

Rfs FL-SQ-H-R-KB-280-40 Kb Type Square Flange Flat Side, 2 1/2" Socket Weld, Carbon Steel Material, Working Pressure up to 280 kg/cm²

rfs fl-sq-h-r-kb-280 40kb type square flange flat side, 1/2" socket weld, carbon steel material, working pressure 280 kg/cm² tipe persegi sisi datar, las soket 1/2", bahan baja karbon, tekanan kerja hingga flanges hydraulics jenis bebibir rata, kimpalan keluli sehingga hydraulics/rfs 液压 型方形法兰平面，2 承插焊，碳钢材料，工作压力高达