BIMED

Lumberg Automation

Oleo Tecnica

Electricals

electricals

Cable Gland

cable-gland

Electrical Connectors

electrical-connectors

Circular Connectors

circular-connectors

Plumbing & Sanitary

plumbing-sanitary

Flanges

flanges

Mechanical Parts

mechanical-parts

O Ring

o-ring

John

Others

Parker

Optibelt

VITON

SAMTECH

V Rings

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

buyerIntroduction

Oring Metric 50 X 4 Nbr 90 Black Shiny

oring metric 50 x 4 nbr 90 black shiny metrik hitam mengkilap o ring o-ring oem berkilat gelang 公制 黑色闪亮 o型圈 oem代工

oring-metric-50-x-4-nbr-90-black-shiny

Oring Metric 50 X 4 Nbr 70 Black Shiny

oring metric 50 x 4 nbr 70 black shiny metrik hitam mengkilap o ring o-ring oem berkilat gelang 公制 黑色闪亮 o型圈 oem代工

oring-metric-50-x-4-nbr-70-black-shiny

O-RING 50MM Id X 1.2MM Dia C/S Material Nbr 70

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).  

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR)  

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance.  

O-Rings and rubber seals are generally used for:

Applications that require resistance to OIL 

Applications that are required to work in low temperatures (-0°C) 

High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

Covering 	and lubricating the threading of the shaft 

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

O-RING 50MM Id X 1.2MM Dia C/S Material Nbr 70Additional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Primary UsageO-Rings and rubber seals are generally used for:<ul class="md-block-unordered-list-item"><li>Applications that require resistance to OIL </li><li>Applications that are required to work in low temperatures (-0°C) </li><li>High performance Fuel systems that requires strictly no leakage</li><ul class="md-block-unordered-list-item"><li>Aircrafts </li><li>Marine Ships </li><li>F1 Cars</li></ul><li>General Industrial Use </li></ul>Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:<ul class="md-block-unordered-list-item"><li>Covering 	and lubricating the threading of the shaft </li></ul>The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.<ul class="md-block-unordered-list-item"><li>Don’t force it over sharp corners </li></ul>That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.<ul class="md-block-unordered-list-item"><li>Even stretching </li></ul>You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.<ul class="md-block-unordered-list-item"><li>Don’t roll it down the shaft </li></ul>Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.<ul class="md-block-unordered-list-item"><li>Finishing 	it off </li></ul>Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/hQQ_ewcayxrxuLLMMSVQFM.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

O-RING 50MM Id X 1.2MM Dia C/S Material Nbr 70
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>&nbsp;
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance.&nbsp;&nbsp;
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
<ul>
<li>Applications that require resistance to OIL&nbsp;</li>
<li>Applications that are required to work in low temperatures (-0°C)&nbsp;</li>
<li>High performance Fuel systems that requires strictly no leakage</li>
<ul>
<li>Aircrafts&nbsp;</li>
<li>Marine Ships&nbsp;</li>
<li>F1 Cars</li>
</ul>
<li>General Industrial Use&nbsp;&nbsp;&nbsp;</li>
</ul>
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
<ul>
<li>Covering 	and lubricating the threading of the shaft&nbsp;</li>
</ul>
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
<ul>
<li>Don’t force it over sharp corners&nbsp;</li>
</ul>
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
<ul>
<li>Even stretching&nbsp;</li>
</ul>
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
<ul>
<li>Don’t roll it down the shaft&nbsp;</li>
</ul>
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
<ul>
<li>Finishing 	it off&nbsp;</li>
</ul>
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:cs422"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/hQQ_ewcayxrxuLLMMSVQFM.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="cs422" 
 layout="nodisplay"></amp-image-lightbox>

Gates

O-RING 50MM Id X 1.2MM Dia C/S Material Nbr

o-ring 50mm id 1.2mm dia c/s material nbr bahan ring oem gelang oem/oem代工 型圈 50 毫米内径 1.2 毫米直径 材料 o型圈 oem代工

o-ring-50mm-id-x-1-2mm-dia-c-s-material-nbr

Oring Metric 58 X 4 Nbr 70 Black Shiny

oring metric 58 x 4 nbr 70 black shiny metrik hitam mengkilap o ring o-ring oem berkilat gelang 公制 黑色闪亮 o型圈 oem代工

oring-metric-58-x-4-nbr-70-black-shiny

Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518 (for 50MM Od Tube)

Carbon Steel ST52.3 Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518 (for 50MM Od Tube)

SAE Code 61 with optimum working pressure of 3000 PSI

Body made via normalized forgings which is strong and durable

Consists of male flange, female flange, NBR O-ring seal, socket cap screws and spring washers

Butt weld (weld-on) connection for pipes of various size and thickness

<h3 class="md-block-header-three">Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)</h3>Carbon Steel ST52.3 Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)About this item<ul class="md-block-unordered-list-item"><li>SAE Code 61 with optimum working pressure of 3000 PSI</li><li>Body made via normalized forgings which is strong and durable</li><li>Made of ST52.3 steel material</li><li>Consists of male flange, female flange, NBR O-ring seal, socket cap screws and spring washers</li><li>Butt weld (weld-on) connection for pipes of various size and thickness</li></ul>Technical Spec<ul class="md-block-unordered-list-item"><li>Netto Weight 2.500 KG</li><li>Height Dimension 9.300</li><li>Length Dimension 9.000</li><li>Width Dimension 7.800</li><li>Dimension uom 9.000</li></ul>

<h3>Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)</h3>
Carbon Steel ST52.3 Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)
About this item
<ul>
<li>SAE Code 61 with optimum working pressure of 3000 PSI</li>
<li>Body made via normalized forgings which is strong and durable</li>
<li>Made of ST52.3 steel material</li>
<li>Consists of male flange, female flange, NBR O-ring seal, socket cap screws and spring washers</li>
<li>Butt weld (weld-on) connection for pipes of various size and thickness</li>
</ul>
Technical Spec
<ul>
<li>Netto Weight 2.500 KG</li>
<li>Height Dimension 9.300</li>
<li>Length Dimension 9.000</li>
<li>Width Dimension 7.800</li>
<li>Dimension uom 9.000</li>
</ul>

Sch80 Complete Set Technical Data sheet

AF Hydro

RFS Hydraulics

BOTHWELL

LAME

Stauff

MJ Technos

LY Metal

Pipe Clamps

Pipe Coupling

Ferrule Fittings

Pipe Adaptor

Pipe Elbow

Pipe Nipple

Pipe Tee

Camlock Fittings

Copper Tubing

Kelvin How

Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 61 3000 Psi, 1 1/2" Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518 (for 50MM Od Tube)

oleo tecnica carbon steel st52.3 sae flange code 61 3000 psi, 1/2" butt weld sch80 complete set, 4-bolt w/ nbr o-ring metric cap screws, j518 (for 50mm od tube) 4-baut dengan sekrup tutup metrik sae-h-it-bw-3-c-14-50-38 flanges skru tecnica/oleo 机械油 碳钢 法兰 螺栓法兰带 形圈和公制带帽螺钉 screws

oleo-tecnica-carbon-steel-st52-3-sae-flange-code-61-3000-psi-1-1-2-butt-weld-sch80-complete-set-4-bolt-flange-w-nbr-o-ring-metric-cap-screws-sae-j518-for-50mm-od-tube

Oring Metric 418 X 4 Nbr 70 Black Shiny

oring metric 418 nbr 70 black shiny metrik hitam mengkilap ring o-ring oem berkilat gelang 公制 黑色闪亮 o型圈 oem代工

oring-metric-418-x-4-nbr-70-black-shiny

Oleo Tecnica Carbon Steel Sae Flange Code, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518 (for 50MM Od Tube)

Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 62 6000 Psi, 1 1/2 Butt Weld Schxxs Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518 (for 50MM Od Tube)

<h3 class="md-block-header-three">Oleo Tecnica Carbon Steel Sae Flange Code, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)</h3>Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 62 6000 Psi, 1 1/2 Butt Weld Schxxs Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)Technical Spec<ul class="md-block-unordered-list-item"><li>Netto Weight 4.5 KG</li><li>Unit Dimension 10 X 9.4 X 11.2 CM</li><li>Height Dimension 11.200</li><li>Length Dimension 10.000</li><li>Width Dimension 9.400</li><li>Dimension uom 10.000</li></ul>

<h3>Oleo Tecnica Carbon Steel Sae Flange Code, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)</h3>
Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 62 6000 Psi, 1 1/2 Butt Weld Schxxs Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)
Technical Spec
<ul>
<li>Netto Weight 4.5 KG</li>
<li>Unit Dimension 10 X 9.4 X 11.2 CM</li>
<li>Height Dimension 11.200</li>
<li>Length Dimension 10.000</li>
<li>Width Dimension 9.400</li>
<li>Dimension uom 10.000</li>
</ul>

SAE-H-IT-BW-6-C-14-50-28

Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 62 6000 Psi, 1 1/2" Butt Weld Schxxs Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518 (for 50MM Od Tube)

oleo tecnica carbon steel st52.3 sae flange code 62 6000 psi, 1/2" butt weld schxxs complete set, 4-bolt w/ nbr o-ring metric cap screws, j518 (for 50mm od tube) baja karbon 4-baut dengan sekrup tutup metrik sae-h-it-bw-6-c-14-50-28 flanges skru penutup tecnica/oleo 机械油 碳钢 螺栓法兰，带 形圈和公制带帽螺钉 screws

oleo-tecnica-carbon-steel-st52-3-sae-flange-code-62-6000-psi-1-1-2-butt-weld-schxxs-complete-set-4-bolt-flange-w-nbr-o-ring-metric-cap-screws-sae-j518-for-50mm-od-tube

Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 5 Butt Weld SCH40 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518

ST52.3 Steel Sae Flange Code 61 3000 Psi, 5 Butt Weld SCH40 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518

<h3 class="md-block-header-three">Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 5 Butt Weld SCH40 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518</h3>ST52.3 Steel Sae Flange Code 61 3000 Psi, 5 Butt Weld SCH40 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518About this item<ul class="md-block-unordered-list-item"><li>SAE Code 61 with optimum working pressure of 3000 PSI</li><li>Body made via normalized forgings which is strong and durable</li><li>Made of ST52.3 steel material</li><li>Consists of male flange, female flange, NBR O-ring seal, socket cap screws and spring washers</li><li>Butt weld (weld-on) connection for pipes of various size and thickness</li></ul>Technical Spec<ul class="md-block-unordered-list-item"><li>Netto Weight 8.500 KG</li><li>Height Dimension 18.400</li><li>Length Dimension 10.000</li><li>Width Dimension 18.000</li><li>Dimension uom 10.000</li></ul>

<h3>Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 5 Butt Weld SCH40 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518</h3>
ST52.3 Steel Sae Flange Code 61 3000 Psi, 5 Butt Weld SCH40 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518
About this item
<ul>
<li>SAE Code 61 with optimum working pressure of 3000 PSI</li>
<li>Body made via normalized forgings which is strong and durable</li>
<li>Made of ST52.3 steel material</li>
<li>Consists of male flange, female flange, NBR O-ring seal, socket cap screws and spring washers</li>
<li>Butt weld (weld-on) connection for pipes of various size and thickness</li>
</ul>
Technical Spec
<ul>
<li>Netto Weight 8.500 KG</li>
<li>Height Dimension 18.400</li>
<li>Length Dimension 10.000</li>
<li>Width Dimension 18.000</li>
<li>Dimension uom 10.000</li>
</ul>

Sch40 Complete Set Technical Data sheet

Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 5" Butt Weld SCH40 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518

oleo tecnica st52.3 steel sae flange code 61 3000 psi, 5" butt weld sch40 complete set, 4-bolt w/ nbr o-ring metric cap screws, j518 kode psi4-baut dengan sekrup tutup metrik sae-h-it-bw-3-c-50-128 flanges kod psi4-bolt skru tecnica/oleo 机械油 钢制 法兰代码 psi4 螺栓法兰带 形圈和公制带帽螺钉 screws

oleo-tecnica-st52-3-steel-sae-flange-code-61-3000-psi-5-butt-weld-sch40-complete-set-4-bolt-flange-w-nbr-o-ring-metric-cap-screws-sae-j518

Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld SCH160 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518 (for 50MM Od Tube)

ST52.3 Steel Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld SCH160 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518 (for 50MM Od Tube)

Butt weld (weld-on) connection for pipes of various size and thickness	

<h3 class="md-block-header-three">Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld SCH160 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)</h3>ST52.3 Steel Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld SCH160 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)About this item<ul class="md-block-unordered-list-item"><li>SAE Code 61 with optimum working pressure of 3000 PSI</li><li>Body made via normalized forgings which is strong and durable</li><li>Made of ST52.3 steel material</li><li>Consists of male flange, female flange, NBR O-ring seal, socket cap screws and spring washers</li><li>Butt weld (weld-on) connection for pipes of various size and thickness	</li></ul>Technical Spec<ul class="md-block-unordered-list-item"><li>Netto Weight 2.500 KG</li><li>Height Dimension 9.300</li><li>Length Dimension 9.000</li><li>Width Dimension 7.800</li><li>Dimension uom 9.000</li></ul>

<h3>Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld SCH160 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)</h3>
ST52.3 Steel Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld SCH160 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)
About this item
<ul>
<li>SAE Code 61 with optimum working pressure of 3000 PSI</li>
<li>Body made via normalized forgings which is strong and durable</li>
<li>Made of ST52.3 steel material</li>
<li>Consists of male flange, female flange, NBR O-ring seal, socket cap screws and spring washers</li>
<li>Butt weld (weld-on) connection for pipes of various size and thickness	</li>
</ul>
Technical Spec
<ul>
<li>Netto Weight 2.500 KG</li>
<li>Height Dimension 9.300</li>
<li>Length Dimension 9.000</li>
<li>Width Dimension 7.800</li>
<li>Dimension uom 9.000</li>
</ul>

SAE-H-IT-BW-3-C-14-50-34

Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 1 1/2" Butt Weld SCH160 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518 (for 50MM Od Tube)

oleo tecnica st52.3 steel sae flange code 61 3000 psi, 1/2" butt weld sch160 complete set, 4-bolt w/ nbr o-ring metric cap screws, j518 (for 50mm od tube) kode psi 4-baut dengan sekrup tutup metrik sae-h-it-bw-3-c-14-50-34 flanges kod skru tecnica/oleo 机械油 钢制 法兰代码 螺栓法兰带 形圈和公制带帽螺钉 screws

oleo-tecnica-st52-3-steel-sae-flange-code-61-3000-psi-1-1-2-butt-weld-sch160-complete-set-4-bolt-flange-w-nbr-o-ring-metric-cap-screws-sae-j518-for-50mm-od-tube

Oleo Tecnica Carbon Steel Flange Code, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws

Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 62 6000 Psi, 1 1/2 Butt Weld SCH160 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518

<h3 class="md-block-header-three">Oleo Tecnica Carbon Steel Flange Code, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws</h3>Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 62 6000 Psi, 1 1/2 Butt Weld SCH160 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 Technical Spec<ul class="md-block-unordered-list-item"><li>Netto Weight 4.5 KG</li><li>Unit Dimension 10 X 9.4X 11.2 CM</li><li>Height Dimension 11.200</li><li>Length Dimension 10.000</li><li>Width Dimension 9.400</li><li>Dimension uom 10.000</li></ul>

<h3>Oleo Tecnica Carbon Steel Flange Code, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws</h3>
Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 62 6000 Psi, 1 1/2 Butt Weld SCH160 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518
&nbsp;Technical Spec
<ul>
<li>Netto Weight 4.5 KG</li>
<li>Unit Dimension 10 X 9.4X 11.2 CM</li>
<li>Height Dimension 11.200</li>
<li>Length Dimension 10.000</li>
<li>Width Dimension 9.400</li>
<li>Dimension uom 10.000</li>
</ul>

Sch160 Complete Set Technical Data sheet

Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 62 6000 Psi, 1 1/2" Butt Weld SCH160 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518

oleo tecnica carbon steel st52.3 sae flange code 62 6000 psi, 1/2" butt weld sch160 complete set, 4-bolt w/ nbr o-ring metric cap screws, j518 kode 4-baut dengan screws sae-h-it-bw-6-c-14-50-34 flanges kod bebibir keluli karbon cincin skru penutup metrik tecnica/oleo 机械油 碳钢法兰代码 螺栓法兰带 形圈和公制带帽螺钉

oleo-tecnica-carbon-steel-st52-3-sae-flange-code-62-6000-psi-1-1-2-butt-weld-sch160-complete-set-4-bolt-flange-w-nbr-o-ring-metric-cap-screws-sae-j518

Oleo Tecnica Carbon Steel, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518 (for 50MM Od Tube)

Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 62 6000 Psi, 1 1/2 Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518 (for 50MM Od Tube)

<h3 class="md-block-header-three">Oleo Tecnica Carbon Steel, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)</h3>Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 62 6000 Psi, 1 1/2 Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)Technical Spec<ul class="md-block-unordered-list-item"><li>Netto Weight 4.5 KG</li><li>Unit Dimension 10 X 9.4 X 11.2 CM</li><li>Height Dimension 11.200</li><li>Length Dimension 10.000</li><li>Width Dimension 9.400</li><li>Dimension uom 10.000</li></ul>

<h3>Oleo Tecnica Carbon Steel, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)</h3>
Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 62 6000 Psi, 1 1/2 Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518 (for 50MM Od Tube)
Technical Spec
<ul>
<li>Netto Weight 4.5 KG</li>
<li>Unit Dimension 10 X 9.4 X 11.2 CM</li>
<li>Height Dimension 11.200</li>
<li>Length Dimension 10.000</li>
<li>Width Dimension 9.400</li>
<li>Dimension uom 10.000</li>
</ul>

Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 62 6000 Psi, 1 1/2" Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518 (for 50MM Od Tube)

oleo tecnica carbon steel st52.3 sae flange code 62 6000 psi, 1/2" butt weld sch80 complete set, 4-bolt w/ nbr o-ring metric cap screws, j518 (for 50mm od tube) baja karbon 4-baut dengan sekrup tutup metrik sae-h-it-bw-6-c-14-50-38 flanges skru penutup tecnica/oleo 机械油 碳钢 螺栓法兰，带 形圈和公制带帽螺钉 screws

oleo-tecnica-carbon-steel-st52-3-sae-flange-code-62-6000-psi-1-1-2-butt-weld-sch80-complete-set-4-bolt-flange-w-nbr-o-ring-metric-cap-screws-sae-j518-for-50mm-od-tube

Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld Schxxs Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518

ST52.3 Steel Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld Schxxs Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518

<h3 class="md-block-header-three">Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld Schxxs Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518</h3>ST52.3 Steel Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld Schxxs Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518About this item<ul class="md-block-unordered-list-item"><li>SAE Code 61 with optimum working pressure of 3000 PSI</li><li>Body made via normalized forgings which is strong and durable</li><li>Made of ST52.3 steel material</li><li>Consists of male flange, female flange, NBR O-ring seal, socket cap screws and spring washers</li><li>Butt weld (weld-on) connection for pipes of various size and thickness</li></ul>Technical Spec<ul class="md-block-unordered-list-item"><li>Netto Weight 2.500 KG</li><li>Height Dimension 9.300</li><li>Length Dimension 9.000</li><li>Width Dimension 7.800</li><li>Dimension uom 9.000</li></ul>

<h3>Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld Schxxs Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518</h3>
ST52.3 Steel Sae Flange Code 61 3000 Psi, 1 1/2 Butt Weld Schxxs Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518
About this item
<ul>
<li>SAE Code 61 with optimum working pressure of 3000 PSI</li>
<li>Body made via normalized forgings which is strong and durable</li>
<li>Made of ST52.3 steel material</li>
<li>Consists of male flange, female flange, NBR O-ring seal, socket cap screws and spring washers</li>
<li>Butt weld (weld-on) connection for pipes of various size and thickness</li>
</ul>
Technical Spec
<ul>
<li>Netto Weight 2.500 KG</li>
<li>Height Dimension 9.300</li>
<li>Length Dimension 9.000</li>
<li>Width Dimension 7.800</li>
<li>Dimension uom 9.000</li>
</ul>

SAE-H-IT-BW-3-C-14-50-28

Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 1 1/2" Butt Weld Schxxs Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518

oleo tecnica st52.3 steel sae flange code 61 3000 psi, 1/2" butt weld schxxs complete set, 4-bolt w/ nbr o-ring metric cap screws, j518 4-baut screws sae-h-it-bw-3-c-14-50-28 flanges bebibir keluli dengan cincin skru penutup metrik tecnica/oleo 机械油 钢制 法兰 螺栓法兰带 形圈和公制带帽螺钉

oleo-tecnica-st52-3-steel-sae-flange-code-61-3000-psi-1-1-2-butt-weld-schxxs-complete-set-4-bolt-flange-w-nbr-o-ring-metric-cap-screws-sae-j518

NBR 70, shore A, B1000 common metric size , 2.7 mm(CS) x 10.5 mm(ID) x 15.9 mm(OD)

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

· Covering and lubricating the threading of the shaft

<h3 class="md-block-header-three">NBR 70, shore A, B1000 common metric size , 2.7 mm(CS) x 10.5 mm(ID) x 15.9 mm(OD)</h3>Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/DmU4MMN5fPFBF2~SUnGVrQ.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<h3>NBR 70, shore A, B1000 common metric size , 2.7 mm(CS) x 10.5 mm(ID) x 15.9 mm(OD)</h3>
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:cev1h"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/DmU4MMN5fPFBF2~SUnGVrQ.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="cev1h" 
 layout="nodisplay"></amp-image-lightbox>

Nbr 70, Shore A, 2.7 Mm(cs) X 10.5 Mm(id) X 15.9 Mm(od)

nbr 70, shore a, 2.7 mm(cs) 10.5 mm(id) 15.9 mm(od) pantai 2,7 10,5 15,9 ring o-ring oem gelang oem/oem代工 70，肖氏 a，2.7 毫米（壳）x 毫米（内径）x 毫米（外径） o型圈 oem代工

nbr-70-shore-a-2-7-mm-cs-x-10-5-mm-id-x-15-9-mm-od

Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 5 Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518

ST52.3 Steel Sae Flange Code 61 3000 Psi, 5 Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518

<h3 class="md-block-header-three">Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 5 Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518</h3>ST52.3 Steel Sae Flange Code 61 3000 Psi, 5 Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518About this item<ul class="md-block-unordered-list-item"><li>SAE Code 61 with optimum working pressure of 3000 PSI</li><li>Body made via normalized forgings which is strong and durable</li><li>Made of ST52.3 steel material</li><li>Consists of male flange, female flange, NBR O-ring seal, socket cap screws and spring washers</li><li>Butt weld (weld-on) connection for pipes of various size and thickness</li></ul>Technical Spec<ul class="md-block-unordered-list-item"><li>Netto Weight 9.000 KG</li><li>Height Dimension 18.400</li><li>Length Dimension 10.000</li><li>Width Dimension 18.000</li><li>Dimension uom 10.000</li></ul>

<h3>Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 5 Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518</h3>
ST52.3 Steel Sae Flange Code 61 3000 Psi, 5 Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring &amp; Metric Cap Screws, Sae J518
About this item
<ul>
<li>SAE Code 61 with optimum working pressure of 3000 PSI</li>
<li>Body made via normalized forgings which is strong and durable</li>
<li>Made of ST52.3 steel material</li>
<li>Consists of male flange, female flange, NBR O-ring seal, socket cap screws and spring washers</li>
<li>Butt weld (weld-on) connection for pipes of various size and thickness</li>
</ul>
Technical Spec
<ul>
<li>Netto Weight 9.000 KG</li>
<li>Height Dimension 18.400</li>
<li>Length Dimension 10.000</li>
<li>Width Dimension 18.000</li>
<li>Dimension uom 10.000</li>
</ul>

Oleo Tecnica ST52.3 Steel Sae Flange Code 61 3000 Psi, 5" Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518

oleo tecnica st52.3 steel sae flange code 61 3000 psi, 5" butt weld sch80 complete set, 4-bolt w/ nbr o-ring metric cap screws, j518 4-baut dengan sekrup tutup metrik, flanges bebibir keluli cincin skru penutup tecnica/oleo 机械油 钢制 法兰 螺栓法兰，带 型圈和公制带帽螺钉，sae

oleo-tecnica-st52-3-steel-sae-flange-code-61-3000-psi-5-butt-weld-sch80-complete-set-4-bolt-flange-w-nbr-o-ring-metric-cap-screws-sae-j518

Oleo Tecnica Stainless Steel 316   Complete Set SAE-S-IT-BW-3-C-14-50-38

     Oleo Tecnica   Stainless Steel 316 SAE Flange Code 61 3000 PSI, 1 1/2” Butt Weld SCH80   Complete Set, 4-bolt Flange w/ NBR O-ring & Metric Cap Screws, SAE J518   (For 50MM OD Tube)    

<h3 class="md-block-header-three">Oleo Tecnica Stainless Steel 316 Complete Set SAE-S-IT-BW-3-C-14-50-38</h3><ul class="md-block-unordered-list-item"><li> Oleo Tecnica Stainless Steel 316 SAE Flange Code 61 3000 PSI, 1 1/2” Butt Weld SCH80 Complete Set, 4-bolt Flange w/ NBR O-ring &amp; Metric Cap Screws, SAE J518 (For 50MM OD Tube) </li><li> 1/2&quot; B/W SCH80 SS316 SAE FLANGE 3000 </li><li>A50 B38 COMPLETE SET (FOR 50MM TUBE) </li></ul>

<h3>Oleo Tecnica Stainless Steel 316 Complete Set SAE-S-IT-BW-3-C-14-50-38</h3>
<ul>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Oleo Tecnica Stainless Steel 316 SAE Flange Code 61 3000 PSI, 1 1/2” Butt Weld SCH80 Complete Set, 4-bolt Flange w/ NBR O-ring &amp; Metric Cap Screws, SAE J518 (For 50MM OD Tube)&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>&nbsp;1/2" B/W SCH80 SS316 SAE FLANGE 3000&nbsp;</li>
<li>A50 B38 COMPLETE SET (FOR 50MM TUBE)&nbsp;&nbsp;&nbsp;&nbsp;</li>
</ul>

Oleo Tecnica Stainless Steel 316 Sae Flange Code 61 3000 Psi, 1 1/2" Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518 (for 50MM Od Tube)

oleo tecnica stainless steel 316 sae flange code 61 3000 psi, 1/2" butt weld sch80 complete set, 4-bolt w/ nbr o-ring metric cap screws, j518 (for 50mm od tube) set lengkap sae-s-it-bw-3-c-14-50-38 flanges keluli tahan karat tecnica/oleo 机械油 不锈钢 全套

oleo-tecnica-stainless-steel-316-sae-flange-code-61-3000-psi-1-1-2-butt-weld-sch80-complete-set-4-bolt-flange-w-nbr-o-ring-metric-cap-screws-sae-j518-for-50mm-od-tube

Oleo Tecnica Stainless Steel 316 Sae Flange 1 1/2 Butt Weld Schxxs Complete Set, 4-bolt Flange SAE-S-IT-BW-6-C-14-50-28

     Oleo   Tecnica Stainless Steel 316 SAE Flange Code 62 6000 PSI, 1 1/2” Butt Weld   SCHXXS Complete Set, 4-bolt Flange w/ NBR O-ring & Metric Cap Screws, SAE   J518 (For 50MM OD Tube)    

  1 1/2" B/W   SCHXXS SS316 SAE FLANGE 6000# 

<h3 class="md-block-header-three">Oleo Tecnica Stainless Steel 316 Sae Flange 1 1/2 Butt Weld Schxxs Complete Set, 4-bolt Flange SAE-S-IT-BW-6-C-14-50-28</h3><ul class="md-block-unordered-list-item"><li> Oleo Tecnica Stainless Steel 316 SAE Flange Code 62 6000 PSI, 1 1/2” Butt Weld SCHXXS Complete Set, 4-bolt Flange w/ NBR O-ring &amp; Metric Cap Screws, SAE J518 (For 50MM OD Tube) </li><li> 1 1/2&quot; B/W SCHXXS SS316 SAE FLANGE 6000# </li><li>A50 B28 COMPLETE SET (FOR 50MM TUBE) </li></ul>

<h3>Oleo Tecnica Stainless Steel 316 Sae Flange 1 1/2 Butt Weld Schxxs Complete Set, 4-bolt Flange SAE-S-IT-BW-6-C-14-50-28</h3>
<ul>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Oleo Tecnica Stainless Steel 316 SAE Flange Code 62 6000 PSI, 1 1/2” Butt Weld SCHXXS Complete Set, 4-bolt Flange w/ NBR O-ring &amp; Metric Cap Screws, SAE J518 (For 50MM OD Tube)&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>&nbsp;&nbsp;1 1/2" B/W SCHXXS SS316 SAE FLANGE 6000#&nbsp;</li>
<li>A50 B28 COMPLETE SET (FOR 50MM TUBE)&nbsp;&nbsp;&nbsp;&nbsp;</li>
</ul>

SAE-S-IT-BW-6-C-14-50-28

Oleo Tecnica Stainless Steel 316 Sae Flange Code 62 6000 Psi, 1 1/2" Butt Weld Schxxs Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518 (for 50MM Od Tube)

oleo tecnica stainless steel 316 sae flange code 62 6000 psi, 1/2" butt weld schxxs complete set, 4-bolt w/ nbr o-ring metric cap screws, j518 (for 50mm od tube) 1/2 set lengkap, 4-baut sae-s-it-bw-6-c-14-50-28 flanges keluli tahan karat tecnica/oleo 机械油 不锈钢 法兰 对焊 全套，4 螺栓法兰 1/2

oleo-tecnica-stainless-steel-316-sae-flange-code-62-6000-psi-1-1-2-butt-weld-schxxs-complete-set-4-bolt-flange-w-nbr-o-ring-metric-cap-screws-sae-j518-for-50mm-od-tube

Oleo Tecnica Stainless Steel Butt Weld SCH80 Complete Set  SAE-S-IT-BW-3-C-50-120

     Oleo Tecnica   Stainless Steel 316 SAE Flange Code 61 3000 PSI, 5” Butt Weld SCH80 Complete   Set, 4-bolt Flange w/ NBR O-ring & Metric Cap Screws, SAE J518    

<h3 class="md-block-header-three">Oleo Tecnica Stainless Steel Butt Weld SCH80 Complete Set SAE-S-IT-BW-3-C-50-120</h3><ul class="md-block-unordered-list-item"><li> Oleo Tecnica Stainless Steel 316 SAE Flange Code 61 3000 PSI, 5” Butt Weld SCH80 Complete Set, 4-bolt Flange w/ NBR O-ring &amp; Metric Cap Screws, SAE J518 </li><li>5&quot; B/W SCH80 SS316 SAE FLANGE 3000 </li><li> A141.3 B120 COMPLETE SET </li></ul>

<h3>Oleo Tecnica Stainless Steel Butt Weld SCH80 Complete Set SAE-S-IT-BW-3-C-50-120</h3>
<ul>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Oleo Tecnica Stainless Steel 316 SAE Flange Code 61 3000 PSI, 5” Butt Weld SCH80 Complete Set, 4-bolt Flange w/ NBR O-ring &amp; Metric Cap Screws, SAE J518&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>5" B/W SCH80 SS316 SAE FLANGE 3000&nbsp;</li>
<li>&nbsp;A141.3 B120 COMPLETE SET&nbsp;&nbsp;&nbsp;&nbsp;</li>
</ul>

Oleo Tecnica Stainless Steel 316 Sae Flange Code 61 3000 Psi, 5" Butt Weld SCH80 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518

oleo tecnica stainless steel 316 sae flange code 61 3000 psi, 5" butt weld sch80 complete set, 4-bolt w/ nbr o-ring metric cap screws, j518 set lengkap sae-s-it-bw-3-c-50-120 flanges kimpalan punggung keluli tahan karat tecnica/oleo 机械油 不锈钢对焊 全套

oleo-tecnica-stainless-steel-316-sae-flange-code-61-3000-psi-5-butt-weld-sch80-complete-set-4-bolt-flange-w-nbr-o-ring-metric-cap-screws-sae-j518

Oleo Tecnica Stainless Steel 316 Sae Flange  Butt Weld SCH40 Complete Set,SAE-S-IT-BW-3-C-14-50-40

       Oleo Tecnica   Stainless Steel 316 SAE Flange Code 61 3000 PSI, 1 1/2” Butt Weld SCH40   Complete Set, 4-bolt Flange w/ NBR O-ring & Metric Cap Screws, SAE J518    

    1 1/2" B/W   SCH40 SS316 SAE FLANGE 3000# 

<h3 class="md-block-header-three">Oleo Tecnica Stainless Steel 316 Sae Flange Butt Weld SCH40 Complete Set,SAE-S-IT-BW-3-C-14-50-40</h3><ul class="md-block-unordered-list-item"><li> Oleo Tecnica Stainless Steel 316 SAE Flange Code 61 3000 PSI, 1 1/2” Butt Weld SCH40 Complete Set, 4-bolt Flange w/ NBR O-ring &amp; Metric Cap Screws, SAE J518 </li><li> 1 1/2&quot; B/W SCH40 SS316 SAE FLANGE 3000# </li><li>A50 B40 COMPLETE SET </li></ul>

<h3>Oleo Tecnica Stainless Steel 316 Sae Flange Butt Weld SCH40 Complete Set,SAE-S-IT-BW-3-C-14-50-40</h3>
<ul>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Oleo Tecnica Stainless Steel 316 SAE Flange Code 61 3000 PSI, 1 1/2” Butt Weld SCH40 Complete Set, 4-bolt Flange w/ NBR O-ring &amp; Metric Cap Screws, SAE J518&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>&nbsp;&nbsp;&nbsp;&nbsp;1 1/2" B/W SCH40 SS316 SAE FLANGE 3000#&nbsp;</li>
<li>A50 B40 COMPLETE SET&nbsp;&nbsp;&nbsp;&nbsp;</li>
</ul>

Oleo Tecnica Stainless Steel 316 Sae Flange Code 61 3000 Psi, 1 1/2" Butt Weld SCH40 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518

oleo tecnica stainless steel 316 sae flange code 61 3000 psi, 1/2" butt weld sch40 complete set, 4-bolt w/ nbr o-ring metric cap screws, j518 set lengkap sch40, sae-s-it-bw-3-c-14-50-40 flanges keluli tahan karat lengkap,sae-s-it-bw-3-c-14-50-40 tecnica/oleo 机械油 不锈钢 法兰对焊 全套，sae-s-it-bw-3-c-14-50-40 set,sae-s-it-bw-3-c-14-50-40

oleo-tecnica-stainless-steel-316-sae-flange-code-61-3000-psi-1-1-2-butt-weld-sch40-complete-set-4-bolt-flange-w-nbr-o-ring-metric-cap-screws-sae-j518

Oleo Tecnica Stainless SteelButt Weld SCH40 Complete Set SAE-S-IT-BW-3-C-50-128

     Oleo Tecnica   Stainless Steel 316 SAE Flange Code 61 3000 PSI, 5” Butt Weld SCH40 Complete   Set, 4-bolt Flange w/ NBR O-ring & Metric Cap Screws, SAE J518    

<h3 class="md-block-header-three">Oleo Tecnica Stainless SteelButt Weld SCH40 Complete Set SAE-S-IT-BW-3-C-50-128</h3><ul class="md-block-unordered-list-item"><li> Oleo Tecnica Stainless Steel 316 SAE Flange Code 61 3000 PSI, 5” Butt Weld SCH40 Complete Set, 4-bolt Flange w/ NBR O-ring &amp; Metric Cap Screws, SAE J518 </li><li>5&quot; B/W SCH40 SS316 SAE FLANGE 3000 </li><li> A141.3 B128 COMPLETE SET </li></ul>

<h3>Oleo Tecnica Stainless SteelButt Weld SCH40 Complete Set SAE-S-IT-BW-3-C-50-128</h3>
<ul>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Oleo Tecnica Stainless Steel 316 SAE Flange Code 61 3000 PSI, 5” Butt Weld SCH40 Complete Set, 4-bolt Flange w/ NBR O-ring &amp; Metric Cap Screws, SAE J518&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>5" B/W SCH40 SS316 SAE FLANGE 3000&nbsp;</li>
<li>&nbsp;A141.3 B128 COMPLETE SET&nbsp;&nbsp;&nbsp;&nbsp;</li>
</ul>

Oleo Tecnica Stainless Steel 316 Sae Flange Code 61 3000 Psi, 5" Butt Weld SCH40 Complete Set, 4-bolt Flange w/ Nbr O-ring & Metric Cap Screws, Sae J518

oleo tecnica stainless steel 316 sae flange code 61 3000 psi, 5" butt weld sch40 complete set, 4-bolt w/ nbr o-ring metric cap screws, j518 steelbutt set lengkap sae-s-it-bw-3-c-50-128 flanges tecnica/oleo 机械油 不锈钢对焊 全套