QUEBEE SAFETY

RS Pro

Mechanical Parts

mechanical-parts

O Ring

o-ring

Rubber Seals

rubber-seals

Safety

safety

Safety Gloves

safety-gloves

O-Ring NBR 90, ID 46mm, *3.5mm thick, 90 ± 5 IRHD

Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.

Temperature RangeLow : -22`F / -30`C High: 212`F / 100`C

Overview on Application Rating for Material Nitrile (NBR)

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Primary UsageO-Rings and rubber seals are generally used for:

Applications that require resistance to OIL

Applications that are required to work in low temperatures (-0°C)

High performance Fuel systems that requires strictly no leakage

Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:

Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

NBR O-ring O-Ring NBR 90, ID 46mm, *3.5mm thick, 90 ± 5 IRHDMaterial : Nitrile (NBR) 90 ShoreAdditional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR)Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - GoodOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Primary UsageO-Rings and rubber seals are generally used for:<ul class="md-block-unordered-list-item"><li>Applications that require resistance to OIL</li><li>Applications that are required to work in low temperatures (-0°C)</li><li>High performance Fuel systems that requires strictly no leakage</li><ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul><li>General Industrial Use</li></ul>Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:<ul class="md-block-unordered-list-item"><li>Covering and lubricating the threading of the shaft</li></ul>The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.<ul class="md-block-unordered-list-item"><li>Don’t force it over sharp corners</li></ul>That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.<ul class="md-block-unordered-list-item"><li>Even stretching</li></ul>You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.<ul class="md-block-unordered-list-item"><li>Don’t roll it down the shaft</li></ul>Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.<ul class="md-block-unordered-list-item"><li>Finishing it off</li></ul>Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

NBR O-ring 
O-Ring NBR 90, ID 46mm, *3.5mm thick, 90 ± 5 IRHD
Material : Nitrile (NBR) 90 Shore
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR)</ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. <ins>Primary Usage</ins>O-Rings and rubber seals are generally used for:
<ul>
<li>Applications that require resistance to OIL</li>
<li>Applications that are required to work in low temperatures (-0°C)</li>
<li>High performance Fuel systems that requires strictly no leakage</li>
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
<li>General Industrial Use</li>
</ul>
<ins>Tips for installation of an O-ring</ins>O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.<ins>So how do you install an O-ring?</ins>The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:
<ul>
<li>Covering and lubricating the threading of the shaft</li>
</ul>
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
<ul>
<li>Don’t force it over sharp corners</li>
</ul>
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
<ul>
<li>Even stretching</li>
</ul>
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
<ul>
<li>Don’t roll it down the shaft</li>
</ul>
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
<ul>
<li>Finishing it off</li>
</ul>
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

John

Others

Parker

Optibelt

VITON

SAMTECH

V Rings

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Washers

buyerIntroduction

O-Ring Nbr 90, Id 46 X 3.5

o-ring nbr 90, id 46 x 3.5 o ring oem gelang oem/oem代工 型圈 90，内径 o型圈 oem代工

o-ring-nbr-90-id-46-x-3-5

NBR Cord | Dia 7mm | O-Ring Replacement Cord 

The O-Ring is a simple, versatile and economical device with a vast range of uses. The most common of these uses is a static seal replacing a gasket or sealing washer. O-Rings can also be used as a single or double acting dynamic seal. It can be used to seal both radially and axially.

The O-Ring is ideal for sealing a multitude of simple and complex applications and can deal with both gaseous and liquid media.

<h3 class="md-block-header-three">NBR Cord | Dia 7mm | O-Ring Replacement Cord </h3>The O-Ring is a simple, versatile and economical device with a vast range of uses. The most common of these uses is a static seal replacing a gasket or sealing washer. O-Rings can also be used as a single or double acting dynamic seal. It can be used to seal both radially and axially.<h3 class="md-block-header-three">Features and Benefits:</h3><ul class="md-block-unordered-list-item"><li>Can be used in O-Ring kits</li><li>Available in various diameters</li></ul><h3 class="md-block-header-three">Product Application Information:</h3><ul class="md-block-unordered-list-item"><li>The O-Ring is ideal for sealing a multitude of simple and complex applications and can deal with both gaseous and liquid media.</li></ul><h3 class="md-block-header-three"></h3>

<h3>NBR Cord | Dia 7mm | O-Ring Replacement Cord&nbsp;</h3>
The O-Ring is a simple, versatile and economical device with a vast range of uses. The most common of these uses is a static seal replacing a gasket or sealing washer. O-Rings can also be used as a single or double acting dynamic seal. It can be used to seal both radially and axially.
<h3>Features and Benefits:</h3>
<ul>
<li>Can be used in O-Ring kits</li>
<li>Available in various diameters</li>
</ul>
<h3>Product Application Information:</h3>
<ul>
<li>The O-Ring is ideal for sealing a multitude of simple and complex applications and can deal with both gaseous and liquid media.</li>
</ul>
<h3></h3>

Gates

Vee-Belts

Nbr Cord | Dia 7mm |

nbr cord dia 7mm tali diameter ring o-ring oem gelang oem/oem代工 直径 o型圈 oem代工

nbr-cord-dia-7mm

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING AS568 AS436 ID 148.59 X CS 6.99Material : Nitrile (NBR) 70 Shore Additional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/S1JmbTlV_RX7JM1lBRKvzb.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS436
&nbsp;ID 148.59 X CS 6.99
Material : Nitrile (NBR) 70 Shore
&nbsp;&nbsp;
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:760ad"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/S1JmbTlV_RX7JM1lBRKvzb.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="760ad" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS436 ID 148.59 X CS 6.99 Nitrile (NBR) 70 Shore

oring as568 as436 id 148.59 x cs 6.99 nitrile (nbr) 70 shore o ring o-ring oem gelang oem/oem代工 6.99丁腈（nbr）70邵氏 o型圈 oem代工

oring-as568-as436-id-148-59-x-cs-6-99-nitrile-nbr-70-shore

QB-VERGE-9500-L5-10 VERGE-9500 NBR FOAM COATED GLOVE SZ: 10 (PAIR)

Product Classification: Cut Resistant NBR Glove

Composition: Glassfibre Yarn, HPPE Yarn, Nylon/Polyester Yarn, Spandex & NBR Foam

Color: Grey/Black Coating: Nitrile Foam Coated

Cut Level: EN ISO 13997 Level D Liner: 13 Gauge composite

Sizes: 8/M, 9/L & 10/XL Packaging: 12prs/bag, 144prs/ctn

Compliance: EN 388: 2016 Performance Level: 4X44D

<h3 class="md-block-header-three">QB-VERGE-9500-L5-10 VERGE-9500 NBR FOAM COATED GLOVE SZ: 10 (PAIR)</h3><ul class="md-block-unordered-list-item"><li>Product Classification: Cut Resistant NBR Glove</li><li>Composition: Glassfibre Yarn, HPPE Yarn, Nylon/Polyester Yarn, Spandex &amp; NBR Foam</li><li>Color: Grey/Black Coating: Nitrile Foam Coated</li><li>Cut Level: EN ISO 13997 Level D Liner: 13 Gauge composite</li><li>Sizes: 8/M, 9/L &amp; 10/XL Packaging: 12prs/bag, 144prs/ctn</li></ul>Compliance: EN 388: 2016 Performance Level: 4X44D

<h3>QB-VERGE-9500-L5-10 VERGE-9500 NBR FOAM COATED GLOVE SZ: 10 (PAIR)</h3>
<ul>
<li>Product Classification: Cut Resistant NBR Glove</li>
<li>Composition: Glassfibre Yarn, HPPE Yarn, Nylon/Polyester Yarn, Spandex &amp; NBR Foam</li>
<li>Color: Grey/Black Coating: Nitrile Foam Coated</li>
<li>Cut Level: EN ISO 13997 Level D Liner: 13 Gauge composite</li>
<li>Sizes: 8/M, 9/L &amp; 10/XL Packaging: 12prs/bag, 144prs/ctn</li>
</ul>
Compliance: EN 388: 2016 Performance Level: 4X44D

SPECS

Ansell

SYSBEL

Dupont Tyvek

Safeware

Tempshield

E+E Electronik

Dailove

Respiratory Protection

Fall Protection

Body Protection

Safety Goggles

Hazmat

Workplace Safety

Safety Shoes

Key Cabinets & Letter Boxes

Bags, Filters & Accessories

Ken Ning

QB-VERGE-9500-L5-10 VERGE-9500 Nbr Foam Coated Glove Sz: 10 (pair)

qb-verge-9500-l5-10 verge-9500 nbr foam coated glove sz: 10 (pair) sarung tangan berlapis busa ukuran: (pasang) safety gloves keselamatan quebee bersalut buih (sepasang) safety/魁北克安全 泡沫涂层手套 规格：10（双） 安全手套 魁北克安全

qb-verge-9500-l5-10-verge-9500-nbr-foam-coated-glove-sz-10-pair

QB-VERGE-700-L1-07 VERGE-700 NBR FOAM COATED GLOVE SZ: 07 (PAIR)

Specialized foaming technique maximize contact between the coat and object

Made of nylon yarn with black NBR foam palm

Excellent grip in wet / slightly oily surface

<h3 class="md-block-header-three">QB-VERGE-700-L1-07 VERGE-700 NBR FOAM COATED GLOVE SZ: 07 (PAIR)</h3><ul class="md-block-unordered-list-item"><li>Specialized foaming technique maximize contact between the coat and object</li><li>Made of nylon yarn with black NBR foam palm</li><li>Cut level 1</li><li>Excellent grip in wet / slightly oily surface</li><li>Durable</li><li>Breathable</li><li>Abrasion resistant</li><li>Compliance: EN388:2003</li></ul>

<h3>QB-VERGE-700-L1-07 VERGE-700 NBR FOAM COATED GLOVE SZ: 07 (PAIR)</h3>
<ul>
<li>Specialized foaming technique maximize contact between the coat and object</li>
<li>Made of nylon yarn with black NBR foam palm</li>
<li>Cut level 1</li>
<li>Excellent grip in wet / slightly oily surface</li>
<li>Durable</li>
<li>Breathable</li>
<li>Abrasion resistant</li>
<li>Compliance: EN388:2003</li>
</ul>

data sheet

QB-VERGE-700-L1-07 VERGE-700 Nbr Foam Coated Glove Sz: 07 (pair)

qb-verge-700-l1-07 verge-700 nbr foam coated glove sz: 07 (pair) sarung tangan berlapis busa ukuran: (sepasang) safety gloves keselamatan quebee bersalut buih (pasangan) safety/魁北克安全 泡沫涂层手套 尺码：07（一对） 安全手套 魁北克安全

qb-verge-700-l1-07-verge-700-nbr-foam-coated-glove-sz-07-pair

QB-VERGE-2500-L5-10 VERGE-2500 NBR FOAM COATED GLOVE SZ: 10 (PAIR)

Made of Seamless HPPE and glass fibre yarn with black NBR foam palm

Flexibility provides less fatigue to your hands

<h3 class="md-block-header-three">QB-VERGE-2500-L5-10 VERGE-2500 NBR FOAM COATED GLOVE SZ: 10 (PAIR)</h3><h3 class="md-block-header-three">Description</h3><ul class="md-block-unordered-list-item"><li>Made of Seamless HPPE and glass fibre yarn with black NBR foam palm</li><li>Flexibility provides less fatigue to your hands</li><li>Cut level 5</li><li>Durable</li><li>Breathable</li><li>Abrasion resistant</li><li>Compliance: EN388:2016</li></ul>

<h3>QB-VERGE-2500-L5-10 VERGE-2500 NBR FOAM COATED GLOVE SZ: 10 (PAIR)</h3>
<h3>Description</h3>
<ul>
<li>Made of Seamless HPPE and glass fibre yarn with black NBR foam palm</li>
<li>Flexibility provides less fatigue to your hands</li>
<li>Cut level 5</li>
<li>Durable</li>
<li>Breathable</li>
<li>Abrasion resistant</li>
<li>Compliance: EN388:2016</li>
</ul>

TEST REPORT

QB-VERGE-2500-L5-10 VERGE-2500 Nbr Foam Coated Glove Sz: 10 (pair)

qb-verge-2500-l5-10 verge-2500 nbr foam coated glove sz: 10 (pair) sarung tangan berlapis busa ukuran: (pasang) safety gloves keselamatan quebee bersalut buih (pasangan) safety/魁北克安全 泡沫涂层手套 规格：10（双） 安全手套 魁北克安全

qb-verge-2500-l5-10-verge-2500-nbr-foam-coated-glove-sz-10-pair

QB-VERGE-700-L1-10 VERGE-700 NBR FOAM COATED GLOVE SZ: 10 (PAIR)

<h3 class="md-block-header-three">QB-VERGE-700-L1-10 VERGE-700 NBR FOAM COATED GLOVE SZ: 10 (PAIR)</h3><ul class="md-block-unordered-list-item"><li>Specialized foaming technique maximize contact between the coat and object</li><li>Made of nylon yarn with black NBR foam palm</li><li>Cut level 1</li><li>Excellent grip in wet / slightly oily surface</li><li>Durable</li><li>Breathable</li><li>Abrasion resistant</li><li>Compliance: EN388:2003</li></ul>

<h3>QB-VERGE-700-L1-10 VERGE-700 NBR FOAM COATED GLOVE SZ: 10 (PAIR)</h3>
<ul>
<li>Specialized foaming technique maximize contact between the coat and object</li>
<li>Made of nylon yarn with black NBR foam palm</li>
<li>Cut level 1</li>
<li>Excellent grip in wet / slightly oily surface</li>
<li>Durable</li>
<li>Breathable</li>
<li>Abrasion resistant</li>
<li>Compliance: EN388:2003</li>
</ul>

QB-VERGE-700-L1-10 VERGE-700 Nbr Foam Coated Glove Sz: 10 (pair)

qb-verge-700-l1-10 verge-700 nbr foam coated glove sz: 10 (pair) sarung tangan berlapis busa ukuran: (pasang) safety gloves keselamatan quebee bersalut buih (sepasang) safety/魁北克安全 泡沫涂层手套 规格：10（双） 安全手套 魁北克安全

qb-verge-700-l1-10-verge-700-nbr-foam-coated-glove-sz-10-pair

QB-VERGE-9300-L3-10 VERGE-9300 NBR FOAM COATED GLOVE SZ: 10 (PAIR)

Product Classification: Cut Resistant NBR Coated Glove

Composition: HPPE Yarn, Polyester Yarn, Spandex & NBR Foam

Cut Level: EN ISO 13997 Level C Liner: 13 Gauge Composite

Sizes: 7/S, 8/M, 9/L & 10/XL Packaging: 12prs/bag, 144prs/ctn

Excellent High Performance Polyethylene Cut Resistant Liner

Applications: Automotive assembly, Engine/Transmission assembly, Metal Stamping & Assembly, motored Equipment handling, construction, Glass handling & Aerospace.

Compliance: EN 388: 2016 Performance Level: 4X44C

<h3 class="md-block-header-three">QB-VERGE-9300-L3-10 VERGE-9300 NBR FOAM COATED GLOVE SZ: 10 (PAIR)</h3><ul class="md-block-unordered-list-item"><li>Product Classification: Cut Resistant NBR Coated Glove</li><li>Composition: HPPE Yarn, Polyester Yarn, Spandex &amp; NBR Foam</li><li>Color: Grey/Black Coating: Nitrile Foam Coated</li><li>Cut Level: EN ISO 13997 Level C Liner: 13 Gauge Composite</li><li>Sizes: 7/S, 8/M, 9/L &amp; 10/XL Packaging: 12prs/bag, 144prs/ctn</li><li>Excellent High Performance Polyethylene Cut Resistant Liner</li><li>Strong Coating Adhesion</li><li>Exceptional Comfort &amp; Breathability</li><li>Applications: Automotive assembly, Engine/Transmission assembly, Metal Stamping &amp; Assembly, motored Equipment handling, construction, Glass handling &amp; Aerospace.</li></ul>Compliance: EN 388: 2016 Performance Level: 4X44C

<h3>QB-VERGE-9300-L3-10 VERGE-9300 NBR FOAM COATED GLOVE SZ: 10 (PAIR)</h3>
<ul>
<li>Product Classification: Cut Resistant NBR Coated Glove</li>
<li>Composition: HPPE Yarn, Polyester Yarn, Spandex &amp; NBR Foam</li>
<li>Color: Grey/Black Coating: Nitrile Foam Coated</li>
<li>Cut Level: EN ISO 13997 Level C Liner: 13 Gauge Composite</li>
<li>Sizes: 7/S, 8/M, 9/L &amp; 10/XL Packaging: 12prs/bag, 144prs/ctn</li>
<li>Excellent High Performance Polyethylene Cut Resistant Liner</li>
<li>Strong Coating Adhesion</li>
<li>Exceptional Comfort &amp; Breathability</li>
<li>Applications: Automotive assembly, Engine/Transmission assembly, Metal Stamping &amp; Assembly, motored Equipment handling, construction, Glass handling &amp; Aerospace.</li>
</ul>
Compliance: EN 388: 2016 Performance Level: 4X44C

specs

certificate

QB-VERGE-9300-L3-10 VERGE-9300 Nbr Foam Coated Glove Sz: 10 (pair)

qb-verge-9300-l3-10 verge-9300 nbr foam coated glove sz: 10 (pair) sarung tangan berlapis busa ukuran: (pasang) safety gloves keselamatan quebee bersalut buih (sepasang) safety/魁北克安全 泡沫涂层手套 规格：10（双） 安全手套 魁北克安全

qb-verge-9300-l3-10-verge-9300-nbr-foam-coated-glove-sz-10-pair

QB-VERGE-9500-L5-09 VERGE-9500 NBR FOAM COATED GLOVE SZ: 09 (PAIR)

<h3 class="md-block-header-three">QB-VERGE-9500-L5-09 VERGE-9500 NBR FOAM COATED GLOVE SZ: 09 (PAIR)</h3><ul class="md-block-unordered-list-item"><li>Product Classification: Cut Resistant NBR Glove</li><li>Composition: Glassfibre Yarn, HPPE Yarn, Nylon/Polyester Yarn, Spandex &amp; NBR Foam</li><li>Color: Grey/Black Coating: Nitrile Foam Coated</li><li>Cut Level: EN ISO 13997 Level D Liner: 13 Gauge composite</li><li>Sizes: 8/M, 9/L &amp; 10/XL Packaging: 12prs/bag, 144prs/ctn</li></ul>Compliance: EN 388: 2016 Performance Level: 4X44D

<h3>QB-VERGE-9500-L5-09 VERGE-9500 NBR FOAM COATED GLOVE SZ: 09 (PAIR)</h3>
<ul>
<li>Product Classification: Cut Resistant NBR Glove</li>
<li>Composition: Glassfibre Yarn, HPPE Yarn, Nylon/Polyester Yarn, Spandex &amp; NBR Foam</li>
<li>Color: Grey/Black Coating: Nitrile Foam Coated</li>
<li>Cut Level: EN ISO 13997 Level D Liner: 13 Gauge composite</li>
<li>Sizes: 8/M, 9/L &amp; 10/XL Packaging: 12prs/bag, 144prs/ctn</li>
</ul>
Compliance: EN 388: 2016 Performance Level: 4X44D

QB-VERGE-9500-L5-09 VERGE-9500 Nbr Foam Coated Glove Sz: 09 (pair)

qb-verge-9500-l5-09 verge-9500 nbr foam coated glove sz: 09 (pair) sarung tangan berlapis busa ukuran: (sepasang) safety gloves keselamatan quebee bersalut buih (pasangan) safety/魁北克安全 泡沫涂层手套 尺码：09（一对） 安全手套 魁北克安全

qb-verge-9500-l5-09-verge-9500-nbr-foam-coated-glove-sz-09-pair

QB-VERGE-9500-L5-08 VERGE-9500 NBR FOAM COATED GLOVE SZ: 08 (PAIR)

<h3 class="md-block-header-three">QB-VERGE-9500-L5-08 VERGE-9500 NBR FOAM COATED GLOVE SZ: 08 (PAIR)</h3><ul class="md-block-unordered-list-item"><li>Product Classification: Cut Resistant NBR Glove</li><li>Composition: Glassfibre Yarn, HPPE Yarn, Nylon/Polyester Yarn, Spandex &amp; NBR Foam</li><li>Color: Grey/Black Coating: Nitrile Foam Coated</li><li>Cut Level: EN ISO 13997 Level D Liner: 13 Gauge composite</li><li>Sizes: 8/M, 9/L &amp; 10/XL Packaging: 12prs/bag, 144prs/ctn</li></ul>Compliance: EN 388: 2016 Performance Level: 4X44D

<h3>QB-VERGE-9500-L5-08 VERGE-9500 NBR FOAM COATED GLOVE SZ: 08 (PAIR)</h3>
<ul>
<li>Product Classification: Cut Resistant NBR Glove</li>
<li>Composition: Glassfibre Yarn, HPPE Yarn, Nylon/Polyester Yarn, Spandex &amp; NBR Foam</li>
<li>Color: Grey/Black Coating: Nitrile Foam Coated</li>
<li>Cut Level: EN ISO 13997 Level D Liner: 13 Gauge composite</li>
<li>Sizes: 8/M, 9/L &amp; 10/XL Packaging: 12prs/bag, 144prs/ctn</li>
</ul>
Compliance: EN 388: 2016 Performance Level: 4X44D

QB-VERGE-9500-L5-08 VERGE-9500 Nbr Foam Coated Glove Sz: 08 (pair)

qb-verge-9500-l5-08 verge-9500 nbr foam coated glove sz: 08 (pair) sarung tangan berlapis busa ukuran: (sepasang) safety gloves keselamatan quebee bersalut buih safety/魁北克安全 泡沫涂层手套 尺码：08（一对） 安全手套 魁北克安全

qb-verge-9500-l5-08-verge-9500-nbr-foam-coated-glove-sz-08-pair

QB-VERGE-2300-L3-10 VERGE-2300 NBR FOAM COATED GLOVE SZ: 10 (PAIR)

Made of seamless HPPE yarn with black NBR foam palm

Excellent grip on wet/slightly oily surfaces

Durable, breathable, and abrasion-resistant

<h3 class="md-block-header-three">QB-VERGE-2300-L3-10 VERGE-2300 NBR FOAM COATED GLOVE SZ: 10 (PAIR)</h3><ul class="md-block-unordered-list-item"><li>Made of seamless HPPE yarn with black NBR foam palm</li><li>Cut level 3</li><li>Excellent grip on wet/slightly oily surfaces</li><li>Durable, breathable, and abrasion-resistant</li></ul>

<h3>QB-VERGE-2300-L3-10 VERGE-2300 NBR FOAM COATED GLOVE SZ: 10 (PAIR)</h3>
<ul>
<li>Made of seamless HPPE yarn with black NBR foam palm</li>
<li>Cut level 3</li>
<li>Excellent grip on wet/slightly oily surfaces</li>
<li>Durable, breathable, and abrasion-resistant</li>
</ul>

Data Sheet

QB-VERGE-2300-L3-10 VERGE-2300 Nbr Foam Coated Glove Sz: 10 (pair)

qb-verge-2300-l3-10 verge-2300 nbr foam coated glove sz: 10 (pair) sarung tangan berlapis busa ukuran: (pasang) safety gloves keselamatan quebee bersalut buih (sepasang) safety/魁北克安全 泡沫涂层手套 规格：10（双） 安全手套 魁北克安全

qb-verge-2300-l3-10-verge-2300-nbr-foam-coated-glove-sz-10-pair

QB-VERGE-9300-L3-09 VERGE-9300 NBR FOAM COATED GLOVE SZ: 09 (PAIR)

<h3 class="md-block-header-three">QB-VERGE-9300-L3-09 VERGE-9300 NBR FOAM COATED GLOVE SZ: 09 (PAIR)</h3><ul class="md-block-unordered-list-item"><li>Product Classification: Cut Resistant NBR Coated Glove</li><li>Composition: HPPE Yarn, Polyester Yarn, Spandex &amp; NBR Foam</li><li>Color: Grey/Black Coating: Nitrile Foam Coated</li><li>Cut Level: EN ISO 13997 Level C Liner: 13 Gauge Composite</li><li>Sizes: 7/S, 8/M, 9/L &amp; 10/XL Packaging: 12prs/bag, 144prs/ctn</li><li>Excellent High Performance Polyethylene Cut Resistant Liner</li><li>Strong Coating Adhesion</li><li>Exceptional Comfort &amp; Breathability</li><li>Applications: Automotive assembly, Engine/Transmission assembly, Metal Stamping &amp; Assembly, motored Equipment handling, construction, Glass handling &amp; Aerospace.</li></ul>Compliance: EN 388: 2016 Performance Level: 4X44C

<h3>QB-VERGE-9300-L3-09 VERGE-9300 NBR FOAM COATED GLOVE SZ: 09 (PAIR)</h3>
<ul>
<li>Product Classification: Cut Resistant NBR Coated Glove</li>
<li>Composition: HPPE Yarn, Polyester Yarn, Spandex &amp; NBR Foam</li>
<li>Color: Grey/Black Coating: Nitrile Foam Coated</li>
<li>Cut Level: EN ISO 13997 Level C Liner: 13 Gauge Composite</li>
<li>Sizes: 7/S, 8/M, 9/L &amp; 10/XL Packaging: 12prs/bag, 144prs/ctn</li>
<li>Excellent High Performance Polyethylene Cut Resistant Liner</li>
<li>Strong Coating Adhesion</li>
<li>Exceptional Comfort &amp; Breathability</li>
<li>Applications: Automotive assembly, Engine/Transmission assembly, Metal Stamping &amp; Assembly, motored Equipment handling, construction, Glass handling &amp; Aerospace.</li>
</ul>
Compliance: EN 388: 2016 Performance Level: 4X44C

QB-VERGE-9300-L3-09 VERGE-9300 Nbr Foam Coated Glove Sz: 09 (pair)

qb-verge-9300-l3-09 verge-9300 nbr foam coated glove sz: 09 (pair) sarung tangan berlapis busa ukuran: (sepasang) safety gloves keselamatan quebee bersalut buih (pasangan) safety/魁北克安全 泡沫涂层手套 尺码：09（一对） 安全手套 魁北克安全

qb-verge-9300-l3-09-verge-9300-nbr-foam-coated-glove-sz-09-pair

QB-VERGE-9300-L3-07 VERGE-9300 NBR FOAM COATED GLOVE SZ: 07 (PAIR)

<h3 class="md-block-header-three">QB-VERGE-9300-L3-07 VERGE-9300 NBR FOAM COATED GLOVE SZ: 07 (PAIR)</h3><ul class="md-block-unordered-list-item"><li>Product Classification: Cut Resistant NBR Coated Glove</li><li>Composition: HPPE Yarn, Polyester Yarn, Spandex &amp; NBR Foam</li><li>Color: Grey/Black Coating: Nitrile Foam Coated</li><li>Cut Level: EN ISO 13997 Level C Liner: 13 Gauge Composite</li><li>Sizes: 7/S, 8/M, 9/L &amp; 10/XL Packaging: 12prs/bag, 144prs/ctn</li><li>Excellent High Performance Polyethylene Cut Resistant Liner</li><li>Strong Coating Adhesion</li><li>Exceptional Comfort &amp; Breathability</li><li>Applications: Automotive assembly, Engine/Transmission assembly, Metal Stamping &amp; Assembly, motored Equipment handling, construction, Glass handling &amp; Aerospace.</li></ul>Compliance: EN 388: 2016 Performance Level: 4X44C

<h3>QB-VERGE-9300-L3-07 VERGE-9300 NBR FOAM COATED GLOVE SZ: 07 (PAIR)</h3>
<ul>
<li>Product Classification: Cut Resistant NBR Coated Glove</li>
<li>Composition: HPPE Yarn, Polyester Yarn, Spandex &amp; NBR Foam</li>
<li>Color: Grey/Black Coating: Nitrile Foam Coated</li>
<li>Cut Level: EN ISO 13997 Level C Liner: 13 Gauge Composite</li>
<li>Sizes: 7/S, 8/M, 9/L &amp; 10/XL Packaging: 12prs/bag, 144prs/ctn</li>
<li>Excellent High Performance Polyethylene Cut Resistant Liner</li>
<li>Strong Coating Adhesion</li>
<li>Exceptional Comfort &amp; Breathability</li>
<li>Applications: Automotive assembly, Engine/Transmission assembly, Metal Stamping &amp; Assembly, motored Equipment handling, construction, Glass handling &amp; Aerospace.</li>
</ul>
Compliance: EN 388: 2016 Performance Level: 4X44C

QB-VERGE-9300-L3-07 VERGE-9300 Nbr Foam Coated Glove Sz: 07 (pair)

qb-verge-9300-l3-07 verge-9300 nbr foam coated glove sz: 07 (pair) sarung tangan berlapis busa ukuran: (sepasang) safety gloves keselamatan quebee bersalut buih safety/魁北克安全 泡沫涂层手套 尺码：07（一对） 安全手套 魁北克安全

qb-verge-9300-l3-07-verge-9300-nbr-foam-coated-glove-sz-07-pair

QB-VERGE-2500-L5-08 VERGE-2500 NBR FOAM COATED GLOVE SZ: 08 (PAIR)

<h3 class="md-block-header-three">QB-VERGE-2500-L5-08 VERGE-2500 NBR FOAM COATED GLOVE SZ: 08 (PAIR)</h3><h3 class="md-block-header-three">Description</h3><ul class="md-block-unordered-list-item"><li>Made of Seamless HPPE and glass fibre yarn with black NBR foam palm</li><li>Flexibility provides less fatigue to your hands</li><li>Cut level 5</li><li>Durable</li><li>Breathable</li><li>Abrasion resistant</li><li>Compliance: EN388:2016</li></ul>

<h3>QB-VERGE-2500-L5-08 VERGE-2500 NBR FOAM COATED GLOVE SZ: 08 (PAIR)</h3>
<h3>Description</h3>
<ul>
<li>Made of Seamless HPPE and glass fibre yarn with black NBR foam palm</li>
<li>Flexibility provides less fatigue to your hands</li>
<li>Cut level 5</li>
<li>Durable</li>
<li>Breathable</li>
<li>Abrasion resistant</li>
<li>Compliance: EN388:2016</li>
</ul>

QB-VERGE-2500-L5-08 VERGE-2500 Nbr Foam Coated Glove Sz: 08 (pair)

qb-verge-2500-l5-08 verge-2500 nbr foam coated glove sz: 08 (pair) sarung tangan berlapis busa ukuran: (sepasang) safety gloves keselamatan quebee bersalut buih (pasangan) safety/魁北克安全 泡沫涂层手套 尺码：08（一对） 安全手套 魁北克安全

qb-verge-2500-l5-08-verge-2500-nbr-foam-coated-glove-sz-08-pair

QB-VERGE-2300-L3-09 VERGE-2300 NBR FOAM COATED GLOVE SZ: 09 (PAIR)

<h3 class="md-block-header-three">QB-VERGE-2300-L3-09 VERGE-2300 NBR FOAM COATED GLOVE SZ: 09 (PAIR)</h3><ul class="md-block-unordered-list-item"><li>Made of seamless HPPE yarn with black NBR foam palm</li><li>Cut level 3</li><li>Excellent grip on wet/slightly oily surfaces</li><li>Durable, breathable, and abrasion-resistant</li></ul>

<h3>QB-VERGE-2300-L3-09 VERGE-2300 NBR FOAM COATED GLOVE SZ: 09 (PAIR)</h3>
<ul>
<li>Made of seamless HPPE yarn with black NBR foam palm</li>
<li>Cut level 3</li>
<li>Excellent grip on wet/slightly oily surfaces</li>
<li>Durable, breathable, and abrasion-resistant</li>
</ul>

QB-VERGE-2300-L3-09 VERGE-2300 Nbr Foam Coated Glove Sz: 09 (pair)

qb-verge-2300-l3-09 verge-2300 nbr foam coated glove sz: 09 (pair) sarung tangan berlapis busa ukuran: (sepasang) safety gloves keselamatan quebee bersalut buih (pasangan) safety/魁北克安全 泡沫涂层手套 尺码：09（一对） 安全手套 魁北克安全

qb-verge-2300-l3-09-verge-2300-nbr-foam-coated-glove-sz-09-pair

QB-VERGE-2500-L5-09 VERGE-2500 NBR FOAM COATED GLOVE SZ: 09 (PAIR)

<h3 class="md-block-header-three">QB-VERGE-2500-L5-09 VERGE-2500 NBR FOAM COATED GLOVE SZ: 09 (PAIR)</h3><h3 class="md-block-header-three">Description</h3><ul class="md-block-unordered-list-item"><li>Made of Seamless HPPE and glass fibre yarn with black NBR foam palm</li><li>Flexibility provides less fatigue to your hands</li><li>Cut level 5</li><li>Durable</li><li>Breathable</li><li>Abrasion resistant</li><li>Compliance: EN388:2016</li></ul>

<h3>QB-VERGE-2500-L5-09 VERGE-2500 NBR FOAM COATED GLOVE SZ: 09 (PAIR)</h3>
<h3>Description</h3>
<ul>
<li>Made of Seamless HPPE and glass fibre yarn with black NBR foam palm</li>
<li>Flexibility provides less fatigue to your hands</li>
<li>Cut level 5</li>
<li>Durable</li>
<li>Breathable</li>
<li>Abrasion resistant</li>
<li>Compliance: EN388:2016</li>
</ul>

QB-VERGE-2500-L5-09 VERGE-2500 Nbr Foam Coated Glove Sz: 09 (pair)

qb-verge-2500-l5-09 verge-2500 nbr foam coated glove sz: 09 (pair) sarung tangan berlapis busa ukuran: (sepasang) safety gloves keselamatan quebee bersalut buih safety/魁北克安全 泡沫涂层手套 尺码：09（一对） 安全手套 魁北克安全

qb-verge-2500-l5-09-verge-2500-nbr-foam-coated-glove-sz-09-pair

QB-VERGE-2300-L3-08 VERGE-2300 NBR FOAM COATED GLOVE SZ: 08 (PAIR)

<h3 class="md-block-header-three">QB-VERGE-2300-L3-08 VERGE-2300 NBR FOAM COATED GLOVE SZ: 08 (PAIR)</h3><ul class="md-block-unordered-list-item"><li>Made of seamless HPPE yarn with black NBR foam palm</li><li>Cut level 3</li><li>Excellent grip on wet/slightly oily surfaces</li><li>Durable, breathable, and abrasion-resistant</li></ul>

<h3>QB-VERGE-2300-L3-08 VERGE-2300 NBR FOAM COATED GLOVE SZ: 08 (PAIR)</h3>
<ul>
<li>Made of seamless HPPE yarn with black NBR foam palm</li>
<li>Cut level 3</li>
<li>Excellent grip on wet/slightly oily surfaces</li>
<li>Durable, breathable, and abrasion-resistant</li>
</ul>

QB-VERGE-2300-L3-08 VERGE-2300 Nbr Foam Coated Glove Sz: 08 (pair)

qb-verge-2300-l3-08 verge-2300 nbr foam coated glove sz: 08 (pair) sarung tangan berlapis busa ukuran: (sepasang) safety gloves keselamatan quebee bersalut buih (pasangan) safety/魁北克安全 泡沫涂层手套 尺码：08（一对） 安全手套 魁北克安全